|
|
09-28-2010, 10:27 PM | #1 |
Private First Class
33
Rep 150
Posts |
Step By Step Help...Please
I recently had my car clayed and waxed... i was very satisfied with the results.
Since then there is a good amount of spray paint from nearby idiots that were spray painting some things near my car. They didn't sit there and spray paint my car but there is a good amount of overspray on my car. If you gently move your hand across the paint you get a gritty feel. I grabbed some clay and some detailers spray and tried to remove one small area as a test to see if can be removed. It seems that the clay will pull the spray paint off and leave behind a smooth surface. This leads me to my question... What are the steps to wash / seal / wax the car? And can you please also provide the product you would recommend for each step? Thank you for your help! |
09-30-2010, 08:04 PM | #2 |
Second Lieutenant
13
Rep 259
Posts |
Clay with a good lube, follow with a good polish session using a random orbital polisher and meguirs 205 to take out the fine swirls. follow with chemical guys ez glaze and finish with Jet Seal or blackfire.
|
Appreciate
0
|
09-30-2010, 11:34 PM | #3 |
Moderator
683
Rep 4,737
Posts |
Check out http://www.autopia.org/. Lots of information and professional help.
|
Appreciate
0
|
Post Reply |
Bookmarks |
|
|