![]() |
|
![]() |
|
Post Reply |
|
Thread Tools | Search this Thread |
03-06-2022, 01:44 PM | #1 |
Private First Class
![]() 70
Rep 196
Posts |
Charlotte: Best place for Fender Liner/Undertray/Felt Inspection and Repair
Hi all,
I swear that CLT has been getting worse and worse for steep curbs in ordinary driving areas! I'm a pro at avoiding parking curbs, but it's not enough to avoid everything! It's time to get a professional to take a look under the front of my M3 and see whether I need new felt, undertray, fender liner(s), or just an adjustment and maybe replacement plastic mounting screws. Also, before the obvious and well-intentioned suggestions pour in, I want to keep the car stock so an aftermarket skid plate is not what I have in mind. Any suggestions where I should go for this? I'm doubting that the dealer will be reasonable. The car is currently (well) maintained by Eurowise - should I just go there? Or is an auto body place better? Open to any suggestions, and thanks! |
03-07-2022, 10:50 AM | #2 |
Major
![]() ![]() 533
Rep 1,469
Posts
Drives: '11 BMW M3
Join Date: Jun 2011
Location: Charlotte, NC
|
The guys at Eurowise should be able to help you out, especially since you're already familiar with them and they know the car. I recently had an alignment performed there and they had to drop my Varis Undertray in the rear and noted I was missing some screws/bolts and even gave me a few different sizes as example so I could pick some up at the hardware store.
I know you said you want to keep the car stock, but I can't recommend going with an aftermarket skid enough, especially with these roads, you'll be buying new OEM felt pieces every couple months (unless you rarely drive your car).
__________________
New: '11.5 e90 M3 | DCT | Space Gray/Novillo | ZCV | ZCW | ZP2 | ESS 625 | BPM | M Performance | iPE | BC Racing | BPM | iND | LUX | Volk | Coby | Recaro
Sold: '11.5 e92 M3 | DCT | Mineral White/Novillo | ZCP | ZCV | ZCW | ZP2 | M Performance | ACM | BPM | iND | Thule | LUX | Macht Schnell | Broadway Static | Rogue Engineering | BBS | Challenge | Metak |
Appreciate
1
RD1M357.00 |
Post Reply |
Bookmarks |
Thread Tools | Search this Thread |
|
|