|
|
01-03-2018, 04:45 PM | #1 |
First Lieutenant
60
Rep 387
Posts |
FS: Forged1 Split 10 custom 3-piece 20s
Forged1 Split 10 custom 3-Piece wheels 20x9 with 245/30/20 Nexen N'fera SU1 20x10.5 with 295/25/20 Hankook V12 These were custom made for the E92 so not entirely sure of the offsets, but I believe it's low 40s, maybe mid 30s for the fronts. If this is a concern I do plan to attempt to measure the offset soon. Either way, you can always run spacers if necessary. - Gloss black face with chromed outer barrel for easy maintenance - both rears were recently resealed as they were losing 4-5 psi every week, but now hold air as expected - both rears have minimal curb rash but it's not very noticeable unless you look close up -No cracks or bends Tires and TPMS included. I will get close up photos posted soon. Let me know if you have any questions. UPDATE: measured the exact offsets Front - 20x9, 6in backspace, so 25.4mm offset Rear - 20x10.5, 7.5in backspace, so 44.45mm offset Last edited by ehoffman; 09-11-2019 at 09:54 AM.. |
10-22-2018, 03:40 PM | #17 |
First Lieutenant
60
Rep 387
Posts |
The wheel manufacturers of most custom wheels won't tell you the offset, but I believe it's ~40 in the rear and ~35 in the front. Good thing about high offsets is that you can always throw spacers on there to bring the offset down for a more aggressive stance if needed. If you're interested I can measure to try and get a more precise offset.
|
Appreciate
0
|
Post Reply |
Bookmarks |
|
|