Sponsored by The Tire Rack

[mig28]

guys, Iam helping my little brother building his E90 M3 and planning to get 19 inch BBS LM on his car.

what Iam saying is that will the 19x9,5 et 32 at front will fit e90 m3?and 19x11 on the rear.

any modification needed?will be using Bilstein PSS10 for the coilover.And lastly whats the tire size recomendation?

for those who has the same specs on e90 m3, please feel free to post some pics

thnx again everyone

[dgbos]

I have LM's in 19x9.5 et32 and run a 10mm spacer. I run 19x10 et25 with 5mm spacer in rear. with the 19x11 you shouldn't need spacer in the rear but definitely in the front. BBS ships a 10mm with the 9.5 et32

[mig28]

Originally Posted by dgbos

I have LM's in 19x9.5 et32 and run a 10mm spacer. I run 19x10 et25 with 5mm spacer in rear. with the 19x11 you shouldn't need spacer in the rear but definitely in the front. BBS ships a 10mm with the 9.5 et32

What brand did u used on ur front lm?

[Envyscorpio]

19x8.5 et 32 for the front you meant? 19x10 et 25 are the wheels tirerack recommends. Pushing your wheels too far out with spacers will put stress and not to mention more rocks get pick up and thrown at the rear fenders. Get quality spacers if you must.

[slicer]

Originally Posted by Envyscorpio

19x8.5 et 32 for the front you meant? 19x10 et 25 are the wheels tirerack recommends. Pushing your wheels too far out with spacers will put stress and not to mention more rocks get pick up and thrown at the rear fenders. Get quality spacers if you must.

These are e46 m3 sizes. The e9x m3 can fit the wider version. Tirerack is often conservative with their recommendations.

[Envyscorpio]

Originally Posted by slicer

These are e46 m3 sizes. The e9x m3 can fit the wider version. Tirerack is often conservative with their recommendations.

Gotcha, I did a little research and just realized M3 can fit 19x9.5 et 35 + spacers at the front.

I have LM for my E46. What size spacer do I need to fit an E90? reverse mount the front + 12mm spacer and leave the rear as is?