|
|
03-26-2023, 07:33 AM | #1 |
Registered
2
Rep 2
Posts |
DTC 2737 (P0068) Error
So I got the above code after having a CEL appear, and I am having trouble diagnosing this or finding anything online. I'm looking for any help that someone here might be able to provide before I take it in to get diagnosed. I'd prefer to DIY if possible.
The P code fault text is "charge plausibility, diagnosis, cold-start strategy, bank 1" and the action in service recommendation is "check induction system B1 for leaks". I did not find any vaccuum leaks, but only checked the airbox and plenum. I acknowledge this could be related to the TAs. Car has not gone into limp mode. Oil filter housing gasket was recently changed by a shop. I did have a rough idle and a 'slightly' elevated operating temp when i drove it on Thursday (maybe 220 deg). Any ideas? |
Post Reply |
Bookmarks |
|
|