|
|
11-19-2013, 05:15 PM | #1 |
BimmerPost Supporting Vendor
9541
Rep 10,839
Posts |
Motion Control complete suspension kit from IND.
MCS dampers have become a fierce competitor in the US motorsport world, and have helped many drivers advance to podium finishes in recent years. While the companys race engineering experience and excellent manufacturing has benefitted racers for years, the relatively complex setup and lack of a bolt-in solution has kept many weekend warriors who use their cars daily from improving their M3s with MCS suspension. The release of the one way adjustable damper from MCS meant an appeal to the weekend track day enthusiast. Easy to set up, the MCS one way adjustable damper features most of the advanced technology found in MCS more race-oriented product, while allowing for track day enthusiasts to make easy and quick damping decisions that can be felt immediately in the behavior of the car. Even after getting the damper just right, MCS does not provide a complete solution. The end user must add bearings, springs, camber plates, and other pieces to make the suspension complete and ready to install. IND has worked with MCS to simplify the installation, parts selection, and purchasing process, and is proud to offer the MCS single adjustable damper as a true bolt-in kit. The MCS damper features the following innovations: 16 discrete clicks of rebound adjustment - every click is noticeable Damping characteristics are controlled precisely by controlling flow through small holes instead of forcing past traditional shim-stacks Large range of adjustment - no need to valve for spring changes Non-preloaded valve stack - smoother response without becoming harsh Blow-off valve system - blows off with big impacts for more grip in demanding conditions Large piston rod diameter - more fluid displacement gives better low speed damper control Maximum fluid displacement - responds to small amounts of travel for today's low travel suspensions Damper bodies produced from the highest quality steel or aluminum, application dependant, and properly designed to take side-loads without binding or damage, providing a long lifespan Uses a majority of parts from the Motorsport-level MCS 2-Way damper Upgradable to 2-Way remote reservoir dampers Fully rebuildable in the USA A full bolt-in MCS damper package for the E9x M3 includes: MCS 1WNR MCS Front Strut adaptor Powerflex Race urethane upper shock mount Ground Control Front Street Camber Plate 4 Springs Front helper springs and couplers Front torrington bearings Rear spring adjusters Please contact an IND representative today for more information about MCS suspension.
__________________
|
Post Reply |
Bookmarks |
Thread Tools | Search this Thread |
|
|