|
|
03-27-2024, 08:49 PM | #1 |
Enlisted Member
14
Rep 31
Posts |
Air Filter Solution for Pre 09/09 M3s
As some of you have heard, BMW/Mahle have discontinued the charcoal lined (p/n 13727838805) air filters for pre 09/09 M3s. The difference is the spring loaded nub in the intake housing. I have designed a ABS printed replacement to allow you to reuse your existing housing with the later paper filter (p/n 13727838804).
If anyone is interested, I would be happy to make and sell these to support those who do not want to replace their air boxes or run aftermarket filters. |
03-28-2024, 11:44 AM | #2 |
First Lieutenant
467
Rep 374
Posts |
Hi, this shocked me a little bit. I have 2008. But per my research this applies "only" to US models, right? For EU models (mine) I use the 13727838804, right?
US 2008: https://www.realoem.com/bmw/enUS/sho...diagId=13_1243 EU 2008: https://www.realoem.com/bmw/enUS/sho...diagId=13_1243 It really sucks, sorry about that my US friends. |
Appreciate
0
|
03-28-2024, 05:36 PM | #4 |
First Lieutenant
467
Rep 374
Posts |
Thanks for that. Your solution is good. I saw it on some other websites also when doing the research. I hope that the ABS is able to go through heat cycles without shrinking or changing its shape. Btw you could also publish your STL file, I guess people from the forum would appreciate it Still many people would buy it because they don't have a printer.
|
Appreciate
0
|
04-01-2024, 02:24 PM | #5 |
First Lieutenant
318
Rep 309
Posts |
Just an FYI, you can still search for Mahle LX1667. They are the same filters that came from BMW and are still available.
|
Appreciate
2
Necrotic66.50 georgebmwM3312.50 |
05-17-2024, 05:13 PM | #8 |
Derbo Tuning
3657
Rep 3,049
Posts |
In terms of temperature, its the made out of ABS so no difference in that regards!
__________________
IG:ruhrohz_m3
Journal: Link E9x ZCP Suspension Info: Link Track Chat Discord: https://discord.gg/VsKbTyqBVj |
Appreciate
0
|
05-17-2024, 05:38 PM | #9 |
Lieutenant
432
Rep 445
Posts |
I’ll have to take my cover off but I swear I already have that? I’d rather bleed brakes than deal with getting that filter in thanks to the “nub” thing that the filter has.
My e90 was made in spring 08 I believe |
Appreciate
0
|
05-17-2024, 08:38 PM | #10 |
Enlisted Member
14
Rep 31
Posts |
Great question. My car is mostly for track use and I’ve tested it for past 6 months to ensure it works flawlessly. Personally, I like to stick with oe filters because filtration is more important than the couple of hp I might gain with an aftermarket filter.
|
Appreciate
0
|
05-17-2024, 08:39 PM | #11 |
Enlisted Member
14
Rep 31
Posts |
Yeah the early style filters are more difficult to install. You will need a new nub for the paper later style filters
|
Appreciate
0
|
05-17-2024, 10:14 PM | #13 |
Enlisted Member
14
Rep 31
Posts |
I personally avoid any of these oil based washable cotton filters. When they’re clean, they might make a few more hp, but they don’t filter as well and lose power when dirty. To each their own
|
Appreciate
0
|
05-18-2024, 12:06 AM | #14 |
Private
37
Rep 60
Posts |
Thank you for your effort. I’d definitely be interested. Half of us on this forum should be. I tried ordering from a couple places last year that supposedly had the old filters in stock, they sent the new ones, and then refused refunds because bmw says the new part simply supersedes the old.
|
Appreciate
0
|
07-06-2024, 09:32 PM | #17 |
Lieutenant
177
Rep 591
Posts |
|
Appreciate
0
|
07-08-2024, 11:39 AM | #18 |
New Member
27
Rep 12
Posts |
Would you be willing to share the stl file with me? I understand if the answer is no because you're looking to sell a product. If that is the case, how much would you charge me for one.
|
Appreciate
0
|
08-24-2024, 08:24 PM | #20 |
Enlisted Member
14
Rep 31
Posts |
I am providing an update to the intake solution. I recently had them manufactured out of PA6 nylon just like the factory plastic. A few of you reached out since my last update and now I am ready to ship these out to those who are interested. These are really high quality pieces and I’ve attached photos to show how they fit in the intake box. Install takes less than 5 min! Will be selling them for $50 shipped anywhere in the US. PM or post if you have any questions!
|
Post Reply |
Bookmarks |
|
|