|
|
10-16-2018, 12:03 AM | #1 |
Private First Class
5
Rep 131
Posts |
FS: Vorshlag camber plates E9x M3
Up for sale is a set of used Vorshlag camber plates for use with OEM struts and springs. In great condition. Used for 20,000 miles with flawless operation. These camber plates will last the lifetime of the vehicle as the design uses a sealed radial bearing that isolates the spherical bearing in the camber plate from radial turning loads. Fits E90 M3, E92 M3, E93 M3 as well as E82 1M. Reason for sale - I recently upgraded to a set of TCK DA coilovers and unfortunately, had to give these up. My loss is your gain. Last edited by NBPRH; 10-16-2018 at 12:05 AM.. Reason: updated price |
10-16-2018, 06:51 PM | #3 |
Private First Class
5
Rep 131
Posts |
IMHO, taking different alignment settings into account - noise, harshness and vibration is minimal. It's a well made product. I have experienced an occasional "click or clunk" upon low speed turning - don't know if that is a result of coil bind or not. Either way, its only noticeable at low speed and minimal at best. Overall, any drawbacks are far outweighed by the improved handling of the car - the suspension alignment you are able to achieve by installing the plates are really the alignment settings which the car should delivered at in the first place. YMMV. I hope this helps.
|
Appreciate
0
|
10-18-2018, 03:40 AM | #5 |
Private First Class
5
Rep 131
Posts |
I was able to get about 2.4 degrees of camber. The plates are advertised to not raise ride height but I didn’t confirm that with before and after height measurements
|
Appreciate
0
|
Post Reply |
Bookmarks |
Thread Tools | Search this Thread |
|
|