Aftermarket E92 M3 Bumpers

[Cal@Sonic MS]

Originally Posted by Griz

Doesn't look that way.



Revinora:

+1, the first pic looks much better.

[nam71594]

Originally Posted by DOUT

Oem bumper with revinora lip and custom carbon weave attachment to the inside of the air dams.

looks more like the vorsteiner but im diggin the blue!

[F82_SID]

Originally Posted by nam71594

looks more like the vorsteiner but im diggin the blue!

I think this is the VRS GTS3 full CF bumper with the CF left exposed through the air ducts instead of painted. I actually like it and would like to see some more picts.

[SleepyE90]

Originally Posted by Griz

Doesn't look that way.



Revinora:

Originally Posted by Cal@Sonic MS

+1, the first pic looks much better.

Originally Posted by nam71594

looks more like the vorsteiner but im diggin the blue!

Originally Posted by E92_SID

I think this is the VRS GTS3 full CF bumper with the CF left exposed through the air ducts instead of painted. I actually like it and would like to see some more picts.

You are all wrong, it is in fact an OEM euro bumper with the Revinora Race front lip and a custom carbon weave attachment to the inside of the air dams. I remember seeing the work in progress in the build thread a while ago, the owner of the car had the lip refinished and attached in the custom manner you see in the pictures.
Although it resembles the Vorsteiner front bumper it is not, especially since this car was completed before that was even a product on the aftermarket.

Here are the original posts from the build thread translated from Swedish:

Originally Posted by markuska

Page 1:
In addition to dismantling, I started with a special construction of the front.

Have a Revinora Race lip in 1x1 carbon fiber to be filled into the original front.
Then, the draped some carbon fiber on the front. All carbon fiber is in the 1x1 the same as the ceiling.

Revinora lip is very rare there are only seven pieces in the world so far.
Mine is the only one who sold to Europe.


Here is a picture of Revinora Race lip:



Page 5:
Then some pictures of the front, now draped in the air intakes. 
 
Still many coats of clear varnish. 
 
Draper No one is made in a slightly different way. 
by a thin carbon fiber laminates. Thus a kolfiberduk who are already treated with epoxy so it is stiff. 
Works very well when you want absolutely perfect lines, and when everything is flat. 
 
This page is coated so that it is completely smooth with no seams. 
front is about 2 cm lower than the va the VA without the lip. Many thanks to little brother who lends his apartment 
 
 
coating line is masked trial. 
Still some work before the front is complete. 
This is just after draping.


Page 7:
Some pictures from today on the front.

The front is now wholly due painted with the new routes.

What's next is that a boundary line to be painted in black.
It will fade in slightly on kolfibret.

Then it becomes the true blue paint to be on.

Line masked by sealers:



Basic coated:

[F82_SID]

I am placing my order for at VRS GT3S bumper with custom gloss black paint job today! Just like this.... What do you think?

[Griz]

Originally Posted by SuperlativE90

Here are the original posts from the build thread translated from Swedish...

Very cool. Thanks for going to the trouble of putting this post together.

[Hershey]

Originally Posted by E92_SID

I am placing my order for at VRS GT3S bumper with custom gloss black paint job today! Just like this.... What do you think?

I like it. I was planning on this also but no gloss black on the lip, I'm going to leave it CF

[DjZotic]

can anyone recommend me to a body shop in SoCal that can achieve this properly with a Revinora Race lip?

[Raptor251]

OEM bumper with reflectors shaved and OEM splitters