|
|
07-11-2013, 07:10 PM | #1 |
Private
7
Rep 88
Posts |
Misfires and DSC error
Following my previous thread on misfires on all 8 Cylinders I have the following updates and codes. E92 MY08 6MT - no mods 36,000klm (not sure on the miles)
Symptoms: Engine warning light coming on during warm up, slightly rough idle and knock in the engine. Something the DSC Error, no traction control, and no hill start, no tyre pressure monitor would come on and stay for a while before clearing itself (happened about 2 - 3 times and now pretty much DSC is off all the time) CODES Multiple Errors 2B4E to 2B4x (2-8) DME: Misfire impairing exhaust emission cyl(x) (2-8). Replaced coils and plugs so hopefully this will resolve the knocking and misfire codes. Coils on Cyl 1 was buggered and all plugs very black. (I always use E98 petrol). previous owner had driven the car short distances and it is low milage so could be partially from that. All replaced yesterday. 5DF1 DSC Hydraulic Unit: Pump motor connector faulty, Hydraulic Unit: Pump motor connector faulty 5DF0 DSC Hydraulic Unit: Pump motor Mechanic saying the DSC unit needs replacing. Need to get one from Germany to Australia. Strange that both issues happened at the same time. |
Post Reply |
Bookmarks |
|
|