Blown motors, Rod Bearing failure S65 Registry.

Jmags41 · 02-25-2018, 02:17 PM

I should have a better idea tomorrow morning of what went wrong. Sadly, I think I’ll be joining the club. Oil on the floor and out the exhaust, my engine did not cut out though, was able to shut her down for tow to the shop.

http://www.m3post.com/forums/showthread.php?t=1469670

330ciprem · 02-26-2018, 07:31 AM

Quote:

Originally Posted by Jmags41

I should have a better idea tomorrow morning of what went wrong. Sadly, I think I’ll be joining the club. Oil on the floor and out the exhaust, my engine did not cut out though, was able to shut her down for tow to the shop.

http://www.m3post.com/forums/showthread.php?t=1469670

Fingers crossed. Hope she survives.

Jmags41 · 02-26-2018, 06:01 PM

Quote:

Originally Posted by 330ciprem

Fingers crossed. Hope she survives.

Thank you! Crazy how attached you get to these things and the muscle memory you build that doesn’t transfer over to other platforms while driving.

330ciprem · 02-27-2018, 09:22 AM

Quote:

Originally Posted by Jmags41

Thank you! Crazy how attached you get to these things and the muscle memory you build that doesn’t transfer over to other platforms while driving.

Just read your post regarding the cylinder no 2 making a run for it .

If you don't mind me asking - Miles and type of usage?

What are your future plans? This sucks though. Turning a BRILLIANT car into a paperweight. Urghhhhh.

Koo · 02-27-2018, 09:24 AM

Quote:

Originally Posted by 330ciprem

Just read your post regarding the cylinder no 2 making a run for it .

If you don't mind me asking - Miles and type of usage?

What are your future plans? This sucks though. Turning a BRILLIANT car into a paperweight. Urghhhhh.

He also had the bearings replaced 25K miles ago when he put on the supercharger. Issues like this were a big reason why I sold my M3 2 months ago

330ciprem · 02-27-2018, 09:26 AM

Quote:

Originally Posted by Koo

He also had the bearings replaced 25K miles ago when he put on the supercharger. Issues like this were a big reason why I sold my M3 2 months ago

WTF! Rods shot with upgraded bearings!!!

pbonsalb · 02-27-2018, 10:04 AM

It has happened to a few cars. But looks like just a few so far.

Jmags41 · 02-27-2018, 10:05 AM

Quote:

Originally Posted by 330ciprem

Just read your post regarding the cylinder no 2 making a run for it .

If you don't mind me asking - Miles and type of usage?

What are your future plans? This sucks though. Turning a BRILLIANT car into a paperweight. Urghhhhh.

I bought with 25k from previous owner. Daily driven, haven’t tracked ever, have put about 25k on it since bearing and SC. Barley over 50k miles when disaster struck.

strokemycocktus · 02-27-2018, 10:14 AM

This really sucks.
Would you mind telling us which bearings were installed upon the change 25k before?

NeverL8 · 02-27-2018, 10:20 AM

Quote:

Originally Posted by 330ciprem

WTF! Rods shot with upgraded bearings!!!

Probably main bearings went especially with supercharger

Jmags41 · 02-27-2018, 10:27 AM

And Future plans are to by more Kleenex until I run out of tears... I want to keep this car or another E9X. We’ll see though, may be tough to get over the feeling that my engine could blow up anytime i downshift.

330ciprem · 02-27-2018, 10:27 AM

Quote:

Originally Posted by TheRussski

Probably main bearings went especially with supercharger

Main bearings lead to cylinders shooting out as well?

Apologies but I haven't read many threads about mains going so don't know how it actually happens.

Jmags41 · 02-27-2018, 10:30 AM

Quote:

Originally Posted by seevin

This really sucks.
Would you mind telling us which bearings were installed upon the change 25k before?

-VAC Performance Coated Rod Bearing Set
-ARP Connecting Rod Bolt Kit

Koo · 02-27-2018, 10:59 AM

Quote:

Originally Posted by Jmags41

And Future plans are to by more Kleenex until I run out of tears... I want to keep this car or another E9X. We’ll see though, may be tough to get over the feeling that my engine could blow up anytime i downshift.

I think the obvious solution for people with the S65 is to install a device that makes the engine burst in fire of the bearings fail. This way your insurance would get screwed by BMW, not you. Really sorry this has to happen to you, I can only imagine how shitty the situation is for you.

Dave07997S · 02-27-2018, 11:08 AM

Quote:

Originally Posted by Jmags41

-VAC Performance Coated Rod Bearing Set
-ARP Connecting Rod Bolt Kit

Do you know which VAC bearings..they offer 2 sets. Standard clearance with coating and reduced clearance with coating.

Dave

Obioban · 02-27-2018, 11:43 AM

Safe to say that if it's VAC, it's probably shit.

deathbunny · 02-27-2018, 11:50 AM

Quote:

Originally Posted by TX

Real quick. After I do an oil change the first start sounds like the engine is tearing itself apart on the first start I assume due to lack of oil on the timing chain, guides and lifters.
Recently the last couple of weeks if I let the car sit for a day or two, the first start sounds horrible for the first 2 or so seconds I can hear all kinds of clacking and banging, possibly just noisy lifters but its like chucking ice down a garbage disposal type of sound. This isn't normal is it? Once it warms up it's nice and smooth on the start. But a cold start after sitting for a day is grinding and then a big slap which I think is the timing chain guide.
I'm still considering having rod bearings and bolts changed out. 57K miles roughly on an 09 daily driver. I'll see if I can get around to making a video on the weekend after it sits a while so I can record the grinding noise.

I regularly let mine sit for a week or two at a time between driving it and it doesn't sound any different after a couple weeks than it does after enough hours for it to fully cool back down again.

Jmags41 · 02-27-2018, 06:03 PM

Trying to get some more photos of the carnage, just have one so far.

330ciprem · 02-28-2018, 07:59 AM

Quote:

Originally Posted by Jmags41

Trying to get some more photos of the carnage, just have one so far.

This can't be good - keep us posted.

330ciprem · 03-01-2018, 11:45 AM

Quote:

Originally Posted by Jmags41

Trying to get some more photos of the carnage, just have one so far.

Any updates?

Jmags41 · 03-01-2018, 05:33 PM

Quote:

Originally Posted by 330ciprem

Quote:

Originally Posted by Jmags41

Trying to get some more photos of the carnage, just have one so far.

Any updates?

Quote:

Originally Posted by 330ciprem

Quote:

Originally Posted by Jmags41

Trying to get some more photos of the carnage, just have one so far.

Any updates?

Going to swap a low mileage donor in. Potentially a new engine, haven't fully made a decision yet. I can't get rid of this car... hopefully I have her back on the road in a few weeks.

AggieZig · 03-01-2018, 07:59 PM

Quote:

Originally Posted by Jmags41

Going to swap a low mileage donor in. Potentially a new engine, haven't fully made a decision yet. I can't get rid of this car... hopefully I have her back on the road in a few weeks.

I admire your perseverance and determination to drive an E9X M3. Best of luck & keep us posted.

02-25-2018, 02:17 PM	#2003
Jmags41 Private 32 Rep 62 Posts Drives: 2012 E93 Join Date: Jul 2017 Location: Portsmouth, NH iTrader: (0)	I should have a better idea tomorrow morning of what went wrong. Sadly, I think I’ll be joining the club. Oil on the floor and out the exhaust, my engine did not cut out though, was able to shut her down for tow to the shop. http://www.m3post.com/forums/showthread.php?t=1469670
	Appreciate 1 ///M Power-Belgium92185.00 Quote

02-27-2018, 10:04 AM	#2009
pbonsalb Lieutenant General 7679 Rep 13,761 Posts Drives: 18 F90 M5, 99 E36 M3 Turbo Join Date: Feb 2011 Location: New England iTrader: (4)	It has happened to a few cars. But looks like just a few so far.
	Appreciate 0 Quote

02-27-2018, 10:14 AM	#2011
strokemycocktus Lieutenant 139 Rep 428 Posts Drives: E92 M3 6MT ZCP Join Date: Jul 2016 Location: Europe iTrader: (0)	This really sucks. Would you mind telling us which bearings were installed upon the change 25k before?
	Appreciate 0 Quote

02-27-2018, 10:27 AM	#2013
Jmags41 Private 32 Rep 62 Posts Drives: 2012 E93 Join Date: Jul 2017 Location: Portsmouth, NH iTrader: (0)	And Future plans are to by more Kleenex until I run out of tears... I want to keep this car or another E9X. We’ll see though, may be tough to get over the feeling that my engine could blow up anytime i downshift.
	Appreciate 0 Quote

02-27-2018, 11:43 AM	#2018
Obioban Emperor 1697 Rep 2,784 Posts Drives: M3, M3, M5, M5 Join Date: Apr 2008 Location: West Chester, PA iTrader: (0) Garage List 2008 BMW M5 [0.00] 2017 BMW i3 [0.00] 2005 BMW M3 Coupe [0.00] 2001 BMW M5 [0.00]	Safe to say that if it's VAC, it's probably shit. __________________ 2005 M3 Coupe, 2004 M3 Wagon, 2001 M5 Sedan, 2008 M5 6MT Sedan, 2012 128i M sport
	Appreciate 3 BrewRifle437.50 SYT_Shadow12759.50 SDPLV495.00 Quote

02-27-2018, 06:03 PM	#2020
Jmags41 Private 32 Rep 62 Posts Drives: 2012 E93 Join Date: Jul 2017 Location: Portsmouth, NH iTrader: (0)	Trying to get some more photos of the carnage, just have one so far.
	Appreciate 0 Quote