What have you done with or to your M3 today?

Dpc2u · 02-07-2021, 12:35 PM

Quote:

Originally Posted by SoCalRPM

Quote:

Originally Posted by Dpc2u

Picked up a Metak diffuser and put a few coats of jet black and clear Imron on it last weekend. Installed it today. I was going for a subtle look that went well with the 3.5" tips.

Big fan of that subtle look Metak offers. Underrated. Are your 3.5" tips on the stock axle-back?

Quote:

Originally Posted by Helmsman

After watching the Leatherique stories for year I decided to try it out. Had to order from The US so a good $100 before small bottles arrived but will last for long on the other hand.
To be fair my seats where in good shape already but no doubt the stuff seem to do its work, not bad for daily 10years / 80kkm seats.
I only have 18-20C in my garage so aware its a bit shilly, tried out with front seats only. The feeling after one night + Prestine cleaner is not oily on the fingers but a little...rubbery? The way it should be?

They look like they came out pretty well. Idk about rubbery, tho - they should feel soft to the finger tips. Did you use warm water to try and remove the rejuvenator or just the pristine clean?

The OEM axle back modded with the 2.5 pipe surgery performed in my garage.

aerosynch · 02-07-2021, 01:06 PM

H&R Sport springs installed. Not a hard install at all, probably 3 hours with a buddy.

Ajolives · 02-07-2021, 01:22 PM

Quote:

Originally Posted by SGM_E90

Took the car to VT (Saturday) for some suspension work and alignment!

I love the way SGM looks in the shadows.

Ajolives · 02-07-2021, 01:33 PM

Broke my Valve cover cover a while back, so I JB welded the bracket today. They were looking tired so I shot them with some enamel paint because I wasn't paying attention; thought I grabbed matte. I'll rock them for a bit, may not be too bad of a look.

irokwrx · 02-07-2021, 01:37 PM

Quote:

Originally Posted by Helmsman

After watching the Leatherique stories for year I decided to try it out. Had to order from The US so a good $100 before small bottles arrived but will last for long on the other hand.
To be fair my seats where in good shape already but no doubt the stuff seem to do its work, not bad for daily 10years / 80kkm seats.
I only have 18-20C in my garage so aware its a bit shilly, tried out with front seats only. The feeling after one night + Prestine cleaner is not oily on the fingers but a little...rubbery? The way it should be?

Yes that's correct, like rubber. It works best when you can get it as hot as possible. I put a small space heater in my car for a few hours the 2nd time I did it and it came out crazy nice! They look good!

Helmsman · 02-07-2021, 01:56 PM

Quote:

Originally Posted by irokwrx

Yes that's correct, like rubber. It works best when you can get it as hot as possible. I put a small space heater in my car for a few hours the 2nd time I did it and it came out crazy nice! They look good!

Got it. Unfortunately dont have power available in the garage so cant heat up. Hmm... I'll try with some hot water like SoCal suggested and see where it goes. And then take a stab at the rear seats once Summer is here.

Thx

InnerBlueSkies · 02-07-2021, 02:14 PM

Quote:

Originally Posted by Ajolives

Broke my Valve cover cover a while back, so I JB welded the bracket today. They were looking tired so I shot them with some enamel paint because I wasn't paying attention; thought I grabbed matte. I'll rock them for a bit, may not be too bad of a look.

Let me guess, bracket on the passengers side, up front? Although the repair came out great when I did it, high temp epoxy didn't hold, could of been poor prep but I gave up after 2x tries.

Keep us updated

Ajolives · 02-07-2021, 02:19 PM

Quote:

Originally Posted by InnerBlueSkies

Quote:

Originally Posted by Ajolives

Broke my Valve cover cover a while back, so I JB welded the bracket today. They were looking tired so I shot them with some enamel paint because I wasn't paying attention; thought I grabbed matte. I'll rock them for a bit, may not be too bad of a look.

Let me guess, bracket on the passengers side, up front? Although the repair came out great when I did it, high temp epoxy didn't hold, could of been poor prep but I gave up after 2x tries.

Keep us updated

That's a bingo! This is my 2x for the same bracket, I did a good amount of prep this time so we'll see what happens.

Lukaszsok7 · 02-07-2021, 03:14 PM

Quote:

Originally Posted by Ajolives

Broke my Valve cover cover a while back, so I JB welded the bracket today. They were looking tired so I shot them with some enamel paint because I wasn't paying attention; thought I grabbed matte. I'll rock them for a bit, may not be too bad of a look.

Good job they look awesome

Ajolives · 02-07-2021, 04:20 PM

Quote:

Originally Posted by Lukaszsok7

Quote:

Originally Posted by Ajolives

Broke my Valve cover cover a while back, so I JB welded the bracket today. They were looking tired so I shot them with some enamel paint because I wasn't paying attention; thought I grabbed matte. I'll rock them for a bit, may not be too bad of a look.

Good job they look awesome

Thanks! Ended up putting a couple coats of matte clear to match the rest of the engine bay.

Helmsman · 02-08-2021, 07:07 AM

Quote:

Originally Posted by Ajolives

Thanks! Ended up putting a couple coats of matte clear to match the rest of the engine bay.

Look gorgeous, will make that S65 bay shine even more!

vitalsigns · 02-08-2021, 08:53 AM

Added the Pedal Haus heel plate for my floor mats to match my pedals. Should alleviate the need to buy the driver-side floor mat very often (and the bonus passenger side that seems just a money grab by BMW since they are sold only in pairs). Hope the heel plate is comfortable.

Ccieszyn · 02-08-2021, 10:15 AM

Installed the Induktiv wireless charging mat. I also installed a fresh power/EDC/traction button strip, as is tradition (what a garbage design those buttons have!)

The mat is great. I bought it pre-installed in the oddments tray, but I really didn't like the crummy Velcro that was used and thought I might end up with a rattle. So I used automotive Goop as a more permanent solution. Now the mat and tray look and feel as one piece. Love not having a wire hanging around in the cabin any more!

Helmsman · 02-08-2021, 11:52 AM

Quote:

Originally Posted by SoCalRPM

Give it a go. I found that the pristine leaves more of an annoying residue than not. Some microfibers and warm water will do the trick for the final removal. They also add to the satisfaction when you see the water turn brown revealing how much gunk you pulled off.

Cheers mate, bucket of warm water and some damp micro sorted it to perfection...

irokwrx · 02-08-2021, 12:05 PM

I had the day off so I got a chance to tune some speakers I replaced. I wish I could enjoy the sound system more often. When I am driving I am listening to that glorious V8 and the dreadful "DONG" that something is wrong. The low fuel dong gets me every time!

SoCalRPM · 02-08-2021, 01:59 PM

Quote:

Originally Posted by Helmsman

Quote:

Originally Posted by SoCalRPM

Give it a go. I found that the pristine leaves more of an annoying residue than not. Some microfibers and warm water will do the trick for the final removal. They also add to the satisfaction when you see the water turn brown revealing how much gunk you pulled off.

Cheers mate, bucket of warm water and some damp micro sorted it to perfection...

Love to hear it!

_X · 02-08-2021, 02:41 PM

Quote:

Originally Posted by irokwrx

I had the day off so I got a chance to tune some speakers I replaced. I wish I could enjoy the sound system more often. When I am driving I am listening to that glorious V8 and the dreadful "DONG" that something is wrong. The low fuel dong gets me every time!

What software are you using?

irokwrx · 02-08-2021, 04:55 PM

Quote:

Originally Posted by _X

What software are you using?

I have a Audison AP F8.9BIT FORZA. It comes with its own software. I think its called bit one or bit drive. It sounds like the artist and band are on the dash!

SAMM3Y · 02-08-2021, 09:51 PM

Pulled the window tint off the car, can't believe I have been putting that off for so long. It comes off easy once you get it going. Then went for a rip..

irokwrx · 02-08-2021, 11:35 PM

Quote:

Originally Posted by SAMM3Y

Pulled the window tint off the car, can't believe I have been putting that off for so long. It comes off easy once you get it going. Then went for a rip..

what wing is that?

SAMM3Y · 02-09-2021, 12:04 AM

Quote:

Originally Posted by irokwrx

Quote:

Originally Posted by SAMM3Y

Pulled the window tint off the car, can't believe I have been putting that off for so long. It comes off easy once you get it going. Then went for a rip..

what wing is that?

It's an APR mustang drag wing, I don't love it, the foil is nice but the mounts are kind of awful. I like that it's a lower setup with an aggressive angle that's adjustable and I thought it looked good on the mustang. I need to figure out some different mounts for it though.

Epoustouflant · 02-09-2021, 06:46 AM

Working on something

https://www.m3post.com/forums/showthread.php?t=1798421

02-07-2021, 01:06 PM	#15402
aerosynch Private 324 Rep 97 Posts Drives: 2010 E90 M3 6MT Join Date: Jul 2020 Location: Miami, FL iTrader: (1)	H&R Sport springs installed. Not a hard install at all, probably 3 hours with a buddy. Attached Images __________________ 2010 E90 M3 6MT
	Appreciate 5 Dpc2u11313.50 slcook541874.50 wyatth3968.00 PAM3Guy984.50 M3E90sedan172.50 Quote

02-07-2021, 01:33 PM	#15404
Ajolives Major 1173 Rep 1,069 Posts Drives: E90 M3 Join Date: Mar 2019 Location: Tampa iTrader: (0) Garage List 2019 BMW M5 [0.00] 2008 BMW M3 [10.00] 2019 Audi SQ5 [0.00]	Broke my Valve cover cover a while back, so I JB welded the bracket today. They were looking tired so I shot them with some enamel paint because I wasn't paying attention; thought I grabbed matte. I'll rock them for a bit, may not be too bad of a look. Attached Images
	Appreciate 4 InnerBlueSkies1109.00 Lukaszsok745.00 XKxRome0ox1631.50 PAM3Guy984.50 Quote

02-08-2021, 08:53 AM	#15412
vitalsigns Second Lieutenant 249 Rep 258 Posts Drives: BMW Join Date: Sep 2014 Location: So Cal iTrader: (1)	Added the Pedal Haus heel plate for my floor mats to match my pedals. Should alleviate the need to buy the driver-side floor mat very often (and the bonus passenger side that seems just a money grab by BMW since they are sold only in pairs). Hope the heel plate is comfortable.
	Appreciate 0 Quote

02-08-2021, 10:15 AM	#15413
Ccieszyn Private 123 Rep 93 Posts Drives: 2013 E92 M3, 2006 E60 M5 Join Date: Jul 2019 Location: Florida iTrader: (1)	Installed the Induktiv wireless charging mat. I also installed a fresh power/EDC/traction button strip, as is tradition (what a garbage design those buttons have!) The mat is great. I bought it pre-installed in the oddments tray, but I really didn't like the crummy Velcro that was used and thought I might end up with a rattle. So I used automotive Goop as a more permanent solution. Now the mat and tray look and feel as one piece. Love not having a wire hanging around in the cabin any more! Attached Images
	Appreciate 3 InnerBlueSkies1109.00 PAM3Guy984.50 Mimmer69.50 Quote

02-08-2021, 12:05 PM	#15415
irokwrx Lieutenant 785 Rep 558 Posts Drives: 2011 E92 M3 ESS G1 BC Join Date: Jun 2018 Location: Near the "White" House iTrader: (6)	I had the day off so I got a chance to tune some speakers I replaced. I wish I could enjoy the sound system more often. When I am driving I am listening to that glorious V8 and the dreadful "DONG" that something is wrong. The low fuel dong gets me every time! Attached Images __________________ Daily: 2010 Venza Grocery Getter: 16 Q50 Red Sport Track: Top Gear or Grand Tour Concealed Weapon: 11 BMW e92 M3 DCT ESS G1
	Appreciate 1 Scharbag2794.50 Quote

02-08-2021, 09:51 PM	#15419
SAMM3Y Colonel 3110 Rep 2,747 Posts Drives: 2008 m3 Join Date: Feb 2018 Location: NorCal iTrader: (2)	Pulled the window tint off the car, can't believe I have been putting that off for so long. It comes off easy once you get it going. Then went for a rip.. Attached Images __________________ 9ers
	Appreciate 9 slcook541874.50 Scharbag2794.50 Epoustouflant1173.00 InnerBlueSkies1109.00 Davisca4552241.50 aerosynch324.00 CamasM3e934798.50 torrque312.00 jvictormp1151.00 Quote

02-09-2021, 06:46 AM	#15422
Epoustouflant Banned 1173 Rep 450 Posts Drives: E92 M3 Join Date: Apr 2014 Location: Montreal iTrader: (0)	Working on something https://www.m3post.com/forums/showthread.php?t=1798421 Attached Images
	Appreciate 1 XKxRome0ox1631.50 Quote