Angel eyes

MTrizzy · 04-08-2008, 06:04 PM

Quote:

Originally Posted by GregW / Oregon

"No we do not have those at all."

Thanks
Alan Avery
PIAA Customer Service
503-489-6666
1-800-525-7422
Service@piaa-usa.com

PrinceSmooth · 04-09-2008, 12:05 AM

you guys happen to see these?

http://www.e90post.com/forums/showthread.php?t=127432

Shade · 04-09-2008, 12:10 AM

Quote:

Originally Posted by PrinceSmooth

you guys happen to see these?

http://www.e90post.com/forums/showthread.php?t=127432

Yup they are from PIAA japan, too bad the PIAA USA didnt import these.

OzStriker · 04-14-2008, 11:24 PM

I did a writeup over in e90post:

http://www.e90post.com/forums/showth...71#post2489771

GregW / Oregon · 04-15-2008, 10:01 AM

Quote:

Originally Posted by PrinceSmooth

you guys happen to see these?

http://www.e90post.com/forums/showthread.php?t=127432

The PIAA LEDs are the ones I want. I will find a way to get them.

MTrizzy · 04-15-2008, 10:37 AM

Keep me updated...thnx

Shade · 04-15-2008, 01:40 PM

Quote:

Originally Posted by GregW / Oregon

The PIAA LEDs are the ones I want. I will find a way to get them.

You can order it thru Wheelsdude.com or have a frd in Japan to get it for you. My PIAA LED will arrive this week and i will be able to put it on my frd's 335i to test it out.

I will post pic and review for u all.

SS32 · 04-15-2008, 08:47 PM

Holy shit those things are expensive, but I want them. The only thing I don't like about the Thunders is the brightness.

GregW / Oregon · 04-15-2008, 09:19 PM

Quote:

Originally Posted by cowmoo32

Holy shit those things are expensive, but I want them. The only thing I don't like about the Thunders is the brightness.

Yes, adding blue tint to bulbs to make them "whiter" cuts Visible Transmittance (VT) or output making it through the capsule. The LEDs seem like a good choice, and they will not burn out in your lifetime. I wonder how they respond to the dimmed status when you turn on the parking lights? LEDs typically take special dimming equipment.

SS32 · 04-16-2008, 08:52 AM

I don't know. I think an LED is safe as long as the diode forward voltage & current aren't exceeded. I can't imagine running them at a lower current for a short period of time would hurt them. In fact, I built an LED board a few months ago and ran it off of two D cell batteries to see how long it would last. As the batteries died, the LEDs just got dimmer. So I guess the same would go for the current the car is sending to them. As far as I know, the LEDs I used are fine; the lower current from the dying battery didn't hurt them.

badfish · 04-16-2008, 10:29 PM

I just did these on my car. I got the bulbs from Jlevisw. I had the same problem with a loose bulb on one side. I tried swapping the rubber seals and that did not help. Then I took a close look at the bulb to see what the deal was.

What I noticed is that at the base of each of the tabs there was an indentation. The OEM bulb had a much more pronounced indentation than the aftermarket bulb. Some of the tabs on the aftermarket bulb barely had an indentation. It's not easy trying to put that indentation in there so what I did was bend the tabs back. Even that wasn't easy. But the tabs need to be bent back slightly toward the base. After that, the bulb went in nice and snug.

If your bulbs fit, it will be an easy job. If they give you grief, you can spend an hour doing this.

Shade · 04-16-2008, 11:21 PM

Just got my PIAA LED ANGEL eye. I AM NOT IMPRESSED. Its not as bright as GP thunder... however the good thing is it balance the inner and outer ring.

I tried to run it during daytime... its not visible at all under the sun.

Updating pix soon.

MDCTFTW · 04-17-2008, 01:53 AM

Is anyone getting H3s for the corners?

MTrizzy · 04-17-2008, 08:59 AM

Quote:

Originally Posted by MDCTFTW

Is anyone getting H3s for the corners?

Got me a pair, along with the GP thunders. Plan on putting them in this weekend. ill try to get you guys some good comparison pics (OE vs. After Market). I don't have high hopes for the GP thunders, but if i really hate them i can just take them out.

by the way the H3s I got are the Piaa H3 Super Plasma GTX

MDCTFTW · 04-17-2008, 04:32 PM

GP Thunders 8500k 35W H8 on the way via ebay for $21.

Car not even here yet.

nusevad · 04-17-2008, 05:09 PM

Quote:

Originally Posted by MDCTFTW

GP Thunders 8500k 35W H8 on the way via ebay for $21.

Car not even here yet.

Nice

Be ready for some cut up knuckles and hands lol. I would suggest finding someone with small hands or small pliers.

SS32 · 04-17-2008, 07:13 PM

I don't know why everyone keeps saying that. I have pretty big hands, and it wasn't that bad at all for me. I scraped my hands up more pulling the headliner to remove the upper console to hardwire my V1.

fmquadri · 04-18-2008, 01:37 AM

Quote:

Originally Posted by cowmoo32

I don't know why everyone keeps saying that. I have pretty big hands, and it wasn't that bad at all for me. I scraped my hands up more pulling the headliner to remove the upper console to hardwire my V1.

I agree... changing the H8's and H3's was the easiest mod yet... compared to the ghetto way i did the grill mod... the H8's were a cake walk.

took me all of 3 mins to change out the H8s.

much better than stock.. but not quite perfect with the headlights on i think.

Big Windy · 04-18-2008, 08:21 AM

Quote:

Originally Posted by GregW / Oregon

The PIAA LEDs are the ones I want. I will find a way to get them.

classic. can't wait to hear what you find out. i am anxious!

okay. a quick search yielded a not so cheap solution: http://www.priracing.com/product.php...70-upgrade-kit

172 british pounds. but at least they are available.....if anyone can find cheaper.....

Jinxter · 04-18-2008, 11:40 AM

Quote:

Originally Posted by redmtclimber

classic. can't wait to hear what you find out. i am anxious!

okay. a quick search yielded a not so cheap solution: http://www.priracing.com/product.php...70-upgrade-kit

172 british pounds. but at least they are available.....if anyone can find cheaper.....

there is a new system coming out similar to PIAA no idea on cost but it will be avalible in 2 months in the states. Its rated to work even better then PIAA. So Mid June...

GregW / Oregon · 04-18-2008, 11:46 AM

Quote:

Originally Posted by Jinxter

there is a new system coming out similar to PIAA no idea on cost but it will be avalible in 2 months in the states. Its rated to work even better then PIAA. So Mid June...

From whom? Where did you hear this?

Big Windy · 04-18-2008, 11:53 AM

Greg, and others, you guys should not buy these things. Check this link and see the day pics. i guess these things look great during the night, but you can hardly tell during the day. just a word of caution...this is bad news for all of us considering these.

http://www.e90post.com/forums/showth...PIAA+angel+eye

04-09-2008, 12:05 AM	#90
PrinceSmooth First Lieutenant 59 Rep 375 Posts Drives: BMW Supra Join Date: Dec 2006 Location: Los Angeles, CA iTrader: (2) Garage List 2012 BMW X6 M [0.00]	you guys happen to see these? http://www.e90post.com/forums/showthread.php?t=127432 __________________ '25 Toyota Supra
	Appreciate 0 Quote

04-14-2008, 11:24 PM	#92
OzStriker Captain 78 Rep 924 Posts Drives: Ford Falcon Ute, Ducati 1198S Join Date: Sep 2007 Location: Melbourne iTrader: (1) Garage List 2008 BMW E92 M3 [0.00] 2009 Ducati 1198S [0.00]	I did a writeup over in e90post: http://www.e90post.com/forums/showth...71#post2489771 __________________ BMW E92 M3 6MT, G-Power SKII supercharged, custom exhaust with 100 cell cats and Remus Sport mufflers, Brembo 380mm BBK, BMW Performance steering wheel, LUX H8 angel eyes, CF CSL boot, Hamann CF diffuser, Vorsteiner CF lip, CF grilles, CF gills, CF bonnet vents, BMW Performance stripes, RAC RG63 wheels, Eibach lowering springs, camber modifications.
	Appreciate 0 Quote

04-15-2008, 10:37 AM	#94
MTrizzy Lieutenant 28 Rep 449 Posts Drives: 2008 AW M3 Coupe Join Date: Mar 2008 Location: Potomac, MD iTrader: (1)	Keep me updated...thnx __________________ AW E92 M3\|E92 LuX\|Piaa GTX H3\| Rear Fog Light Mod \| Ventureshield (Raja) \|Eisenmann Race Exhaust \|Macht Schnell Filter \| Black Grills \| Black Sides \| H&R Springs \| Fabspeed X-Pipe & High Flow Cats\| CF VRS II rep diffuser\|Most powerful Scoops in the world\|
	Appreciate 0 Quote

04-15-2008, 08:47 PM	#96
SS32 Major 206 Rep 1,427 Posts Drives: 2008 M3 Join Date: May 2007 Location: Raleigh, NC iTrader: (0)	Holy shit those things are expensive, but I want them. The only thing I don't like about the Thunders is the brightness. __________________ V1 DIY - Blinder M45 DIY - Exhaust Cutouts - Removed Clutch Pedal Spring DIY - Fiamm Air Horns
	Appreciate 0 Quote

04-16-2008, 08:52 AM	#98
SS32 Major 206 Rep 1,427 Posts Drives: 2008 M3 Join Date: May 2007 Location: Raleigh, NC iTrader: (0)	I don't know. I think an LED is safe as long as the diode forward voltage & current aren't exceeded. I can't imagine running them at a lower current for a short period of time would hurt them. In fact, I built an LED board a few months ago and ran it off of two D cell batteries to see how long it would last. As the batteries died, the LEDs just got dimmer. So I guess the same would go for the current the car is sending to them. As far as I know, the LEDs I used are fine; the lower current from the dying battery didn't hurt them. __________________ V1 DIY - Blinder M45 DIY - Exhaust Cutouts - Removed Clutch Pedal Spring DIY - Fiamm Air Horns
	Appreciate 0 Quote

04-16-2008, 10:29 PM	#99
badfish Major 112 Rep 1,016 Posts Drives: E92 AW M3 Join Date: Feb 2008 Location: SoCal iTrader: (0) Garage List 2008 M3 [0.00]	I just did these on my car. I got the bulbs from Jlevisw. I had the same problem with a loose bulb on one side. I tried swapping the rubber seals and that did not help. Then I took a close look at the bulb to see what the deal was. What I noticed is that at the base of each of the tabs there was an indentation. The OEM bulb had a much more pronounced indentation than the aftermarket bulb. Some of the tabs on the aftermarket bulb barely had an indentation. It's not easy trying to put that indentation in there so what I did was bend the tabs back. Even that wasn't easy. But the tabs need to be bent back slightly toward the base. After that, the bulb went in nice and snug. If your bulbs fit, it will be an easy job. If they give you grief, you can spend an hour doing this. __________________ Last edited by badfish; 04-16-2008 at 10:47 PM..
	Appreciate 0 Quote

04-16-2008, 11:21 PM	#100
Shade Captain 61 Rep 899 Posts Drives: 12 AW F10 M5 Join Date: Mar 2008 Location: Chicago / Hong Kong iTrader: (1)	Just got my PIAA LED ANGEL eye. I AM NOT IMPRESSED. Its not as bright as GP thunder... however the good thing is it balance the inner and outer ring. I tried to run it during daytime... its not visible at all under the sun. Updating pix soon. __________________ 08 E92 M3 AW M-DCT 09 INDxRENN-SPEC Project GT-R
	Appreciate 0 Quote

04-17-2008, 01:53 AM	#101
MDCTFTW Lieutenant Colonel 157 Rep 1,972 Posts Drives: E92 DCT Join Date: Apr 2008 Location: Norcal iTrader: (0)	Is anyone getting H3s for the corners?
	Appreciate 0 Quote

04-17-2008, 04:32 PM	#103
MDCTFTW Lieutenant Colonel 157 Rep 1,972 Posts Drives: E92 DCT Join Date: Apr 2008 Location: Norcal iTrader: (0)	GP Thunders 8500k 35W H8 on the way via ebay for $21. Car not even here yet.
	Appreciate 0 Quote

04-17-2008, 07:13 PM	#105
SS32 Major 206 Rep 1,427 Posts Drives: 2008 M3 Join Date: May 2007 Location: Raleigh, NC iTrader: (0)	I don't know why everyone keeps saying that. I have pretty big hands, and it wasn't that bad at all for me. I scraped my hands up more pulling the headliner to remove the upper console to hardwire my V1. __________________ V1 DIY - Blinder M45 DIY - Exhaust Cutouts - Removed Clutch Pedal Spring DIY - Fiamm Air Horns
	Appreciate 0 Quote

04-18-2008, 11:53 AM	#110
Big Windy Major General 175 Rep 5,123 Posts Drives: None Join Date: Mar 2007 Location: Bay Area iTrader: (0)	Greg, and others, you guys should not buy these things. Check this link and see the day pics. i guess these things look great during the night, but you can hardly tell during the day. just a word of caution...this is bad news for all of us considering these. http://www.e90post.com/forums/showth...PIAA+angel+eye
	Appreciate 0 Quote