What have you done with or to your M3 today?

dnoble37 · 06-09-2018, 07:44 PM

Quote:

Originally Posted by duk

Drove her after 2 weeks of not driving her lol

Put around 28 miles on her

That's my every day one way trip to work

Scharbag · 06-09-2018, 10:16 PM

Washed and waxed with Klasse... Sucks when you notice all the blemishes... FU Saskatchewan gravel BS!!!

XKxRome0ox · 06-10-2018, 02:52 AM

took the new-to-me e90m3 out to play with other cars at a car meet
even though it's bone stock, it got plenty of attention
several people were checking it out and talking to me about the car

went and bought a set of 513m wheels
now to figure out the tire situation

PAM3Guy · 06-10-2018, 08:47 AM

Bought, claybarred, polished and installed a replacement SG Metallic fuel door from deansbimmer because some knucklehead dinged my original one. Great match and great condition.
Back to her beautiful self again.

ItsGary · 06-11-2018, 12:08 AM

Did the GTS Trans Flash myself today. So much nicer.

94jedi · 06-12-2018, 08:16 PM

Quote:

Originally Posted by XKxRome0ox

took the new-to-me e90m3 out to play with other cars at a car meet
even though it's bone stock, it got plenty of attention
several people were checking it out and talking to me about the car

went and bought a set of 513m wheels
now to figure out the tire situation

Michelin Pilot Sport 4S. There's no other choice.

vincE92M3 · 06-12-2018, 08:20 PM

Replaced a rear speed sensor and washed all the pollen off my car! It was bad, I hadn't washed or moved my car much for 3 months.

Timujin · 06-13-2018, 02:23 AM

Installed new trunk and hood support struts.

ItsGary · 06-13-2018, 02:48 AM

Quote:

Originally Posted by Timujin

Installed new trunk and hood support struts.

I gotta do that. Plus replace my DCT pan now.

Question, do I gotta replace that suction part also with the pan or no?

Timujin · 06-13-2018, 05:41 PM

Quote:

Originally Posted by ItsGary

I gotta do that. Plus replace my DCT pan now.

Question, do I gotta replace that suction part also with the pan or no?

Suction filter should be replaced.

ItsGary · 06-13-2018, 07:01 PM

Quote:

Originally Posted by Timujin

Quote:

Originally Posted by ItsGary

I gotta do that. Plus replace my DCT pan now.

Question, do I gotta replace that suction part also with the pan or no?

Suction filter should be replaced.

I know the filter but what about that suction piece itself?

XKxRome0ox · 06-13-2018, 08:36 PM

Quote:

Originally Posted by 94jedi

Michelin Pilot Sport 4S. There's no other choice.

of course
i had the 4S on my old wheels and loved them

the only issue was trying to figure out the optimal sizing
i'm going with 245/40/18 + 275/35/18
they're pretty darn close according to the online calculators
instead of the 255/40/18 + 275/40/18 that come stock on these for the f80

Banana Hammock · 06-14-2018, 09:53 AM

Quote:

Originally Posted by Timujin

Installed new trunk and hood support struts.

I need to do the hood struts, almost got whacked by the hood a couple times.

M3MPH1S · 06-14-2018, 03:25 PM

Quote:

Originally Posted by ItsGary

I know the filter but what about that suction piece itself?

Can you post a picture of what you're talking about? The filter itself comes with integrated "casing", so that's all you need.

Timujin · 06-14-2018, 05:14 PM

Quote:

Originally Posted by pasghetti

I need to do the hood struts, almost got whacked by the hood a couple times.

Check Pelican in Harbor City.

MaximusB · 06-15-2018, 03:49 PM

Had to put my car back in storage mode at my parent's house. Filled gas tank, carpet under the wheels and battery tender. Took a dirty hit at hockey and separated my shoulder, so won't be driving for about 6 weeks

miked7285 · 06-15-2018, 04:19 PM

Quote:

Originally Posted by XKxRome0ox

took the new-to-me e90m3 out to play with other cars at a car meet
even though it's bone stock, it got plenty of attention
several people were checking it out and talking to me about the car

went and bought a set of 513m wheels
now to figure out the tire situation

What meet did you go to?

XKxRome0ox · 06-15-2018, 04:54 PM

Quote:

Originally Posted by miked7285

What meet did you go to?

an autocross/car meet hosted by Funfzehn Auto
it was in the parking lot of Angel's stadium

i have never heard of that shop before
but it had a decent turn out with a mix of all kinds of cars

KevinGS · 06-15-2018, 07:59 PM

Quote:

Originally Posted by MaximusB

Had to put my car back in storage mode at my parent's house. Filled gas tank, carpet under the wheels and battery tender. Took a dirty hit at hockey and separated my shoulder, so won't be driving for about 6 weeks

But the good news is that first week when you drive it again, it's going to feel AWESOME.

Sometimes you have to not have something for a bit to truly appreciate it...

XKxRome0ox · 06-15-2018, 08:26 PM

tonight - install wheel studs
and clean out the car so i can drop it off at the shop tomorrow

Solo_M_Tech · 06-15-2018, 10:23 PM

Painted my new to me Apex EC7's in 18x9.5 square et35, fitted with 15mm spacers rear and 12mm spacers up front.

This should save some wear and tear on my track set up ( arc 8's, 18x10 et 25 with rs4's)

Installed my new red start/stop button and ///M button as well!

sibhusz06 · 06-16-2018, 12:34 AM

installing a 3m clearbra kit. Got it on eBay for $250. Real pain this is...but coming along pretty good...

06-09-2018, 10:16 PM	#6228
Scharbag Colonel 2795 Rep 2,188 Posts Drives: 2011 E92 M3 Join Date: Oct 2017 Location: Victoria iTrader: (0) Garage List 2011 BMW E92 M3 [0.00]	Washed and waxed with Klasse... Sucks when you notice all the blemishes... FU Saskatchewan gravel BS!!! __________________ 2011 E92 M3 - 6MT, ZCP, ZF LSD, ESS G1, Some other goodies... Last edited by Scharbag; 06-09-2018 at 10:32 PM..
	Appreciate 2 pcohen15396.00 shmad117.50 Quote

06-10-2018, 02:52 AM	#6229
XKxRome0ox e90noob 1632 Rep 1,890 Posts Drives: '08 E90 M3 Join Date: Mar 2012 Location: Los Angeles, CA iTrader: (4)	took the new-to-me e90m3 out to play with other cars at a car meet even though it's bone stock, it got plenty of attention several people were checking it out and talking to me about the car went and bought a set of 513m wheels now to figure out the tire situation __________________ 2008 E90 M3 / LCI trunk + euro tail swap Production date - 2008-04-22
	Appreciate 2 94jedi875.50 Timujin367.00 Quote

06-10-2018, 08:47 AM	#6230
PAM3Guy Major 985 Rep 1,137 Posts Drives: 2012 E92 M3 DCT ZCP Join Date: Nov 2015 Location: Philly burbs, PA iTrader: (1) Garage List 2012 E92 M3 [8.90] 2018 F48 X1 (Daught ... [0.00] 2019 G01 X3 (wife's) [0.00]	Bought, claybarred, polished and installed a replacement SG Metallic fuel door from deansbimmer because some knucklehead dinged my original one. Great match and great condition. Back to her beautiful self again. __________________ 2012 E92 M3 \| ZCP \| DCT \| Space Grey Metallic \| Black Novillo \| BE/ARP \| MPE V2 \| do88 DCT cooler \| Vorschlag \| Solid SF Bushings \| BMW CF Rear Spoiler, RW Carbon Diffuser, CF Front Splitters \| DTEC 160W Angel Eyes
	Appreciate 1 pcohen15396.00 Quote

06-11-2018, 12:08 AM	#6231
ItsGary Colonel 1473 Rep 2,340 Posts Drives: 2009 E90 M3 Join Date: Oct 2017 Location: Vancouver iTrader: (0)	Did the GTS Trans Flash myself today. So much nicer. __________________ '09 ///M3 Sedan - Jerez Black/Fox Red Ext. '09 335i Coupe - Alpine White/Black - SOLD
	Appreciate 2 94jedi875.50 Timujin367.00 Quote

06-12-2018, 08:20 PM	#6233
vincE92M3 Major 588 Rep 1,370 Posts Drives: ///M Join Date: Nov 2012 Location: Atlanta, GA iTrader: (3) Garage List '11 E92 M3 [0.00]	Replaced a rear speed sensor and washed all the pollen off my car! It was bad, I hadn't washed or moved my car much for 3 months. __________________ ///My OEM+ Silverstone Stripper
	Appreciate 0 Quote

06-13-2018, 02:23 AM	#6234
Timujin Major 367 Rep 1,005 Posts Drives: GMC Sierra Join Date: Jul 2012 Location: California iTrader: (9) Garage List 2010 BMW M3 [0.00]	Installed new trunk and hood support struts. __________________ We grow food to feed the animals so we can eat the animals
	Appreciate 1 ItsGary1473.00 Quote

06-15-2018, 03:49 PM	#6242
MaximusB Major 1482 Rep 1,371 Posts Drives: 13 Frozen White E92 Join Date: Apr 2016 Location: Vancouver iTrader: (0)	Had to put my car back in storage mode at my parent's house. Filled gas tank, carpet under the wheels and battery tender. Took a dirty hit at hockey and separated my shoulder, so won't be driving for about 6 weeks
	Appreciate 0 Quote

06-15-2018, 08:26 PM	#6246
XKxRome0ox e90noob 1632 Rep 1,890 Posts Drives: '08 E90 M3 Join Date: Mar 2012 Location: Los Angeles, CA iTrader: (4)	tonight - install wheel studs and clean out the car so i can drop it off at the shop tomorrow __________________ 2008 E90 M3 / LCI trunk + euro tail swap Production date - 2008-04-22
	Appreciate 0 Quote

06-15-2018, 10:23 PM	#6247
Solo_M_Tech Brigadier General 1725 Rep 3,149 Posts Drives: 2014 M5 6MT Join Date: Nov 2013 Location: Massachusetts iTrader: (7) Garage List 2014 BMW M5 [0.00]	Painted my new to me Apex EC7's in 18x9.5 square et35, fitted with 15mm spacers rear and 12mm spacers up front. This should save some wear and tear on my track set up ( arc 8's, 18x10 et 25 with rs4's) Installed my new red start/stop button and ///M button as well! Attached Images __________________ 2014 M5 6MT
	Appreciate 5 FMLYSDN1254.00 PAM3Guy984.50 Montaver3098.00 M3runner346.50 MLife6141476.00 Quote

06-16-2018, 12:34 AM	#6248
sibhusz06 Second Lieutenant 130 Rep 234 Posts Drives: 2011 M3, 2012 X35I, 2007 911 Join Date: Nov 2016 Location: DC iTrader: (0)	installing a 3m clearbra kit. Got it on eBay for $250. Real pain this is...but coming along pretty good... Attached Images
	Appreciate 0 Quote