Official BBS Wheel Thread l Show them off! l 18" / 19" / 20" Welcome!

slicer · 11-05-2019, 06:46 PM

Beautiful ^^

TechE · 12-06-2019, 03:26 AM

I'm back again for an update/question. I passed on the RSII's I posted earlier. Great looking wheels but not the look I want. I found these LM's with lugs for an attractive price that I plan on moving forward with.

But, I'm slightly iffy on fitment. Fronts are 19x10 et25 with 285/30's, and rears 19x11 et25 with 305/30's. They managed to fit on this guys E92, but his suspension looks stock. My E90 is lowered on H&R sport springs. Any cause for concern here?

Second question, how hard would it be to polish the lips, à la 6ixSpd's? Thanks.

InspireSiR · 12-18-2019, 12:38 PM

For your question on fitment, I'm running the same exact spec wheels right now. However, my tire sizes are different and I'm able to still tuck. No gap like your pictures below.

I'm running 285/30 rear; 255/35 front. So slightly stretched.

I believe you can run 295/30 at the rear with some rubbing on the bumper tab. But that will take care of itself over time. Front you can probably run 265/30 or maybe even 275/30 with camber.

It just depends on the look you want. I personally like the combination of slight stretch (not meaty) and tucked (I can't stand wheel gap.)

Quote:

Originally Posted by E.Usaf

I'm back again for an update/question. I passed on the RSII's I posted earlier. Great looking wheels but not the look I want. I found these LM's with lugs for an attractive price that I plan on moving forward with.

But, I'm slightly iffy on fitment. Fronts are 19x10 et25 with 285/30's, and rears 19x11 et25 with 305/30's. They managed to fit on this guys E92, but his suspension looks stock. My E90 is lowered on H&R sport springs. Any cause for concern here?

Second question, how hard would it be to polish the lips, à la 6ixSpd's? Thanks.

TechE · 12-22-2019, 06:37 AM

Quote:

Originally Posted by InspireSiR

For your question on fitment, I'm running the same exact spec wheels right now. However, my tire sizes are different and I'm able to still tuck. No gap like your pictures below.

I'm running 285/30 rear; 255/35 front. So slightly stretched.

I believe you can run 295/30 at the rear with some rubbing on the bumper tab. But that will take care of itself over time. Front you can probably run 265/30 or maybe even 275/30 with camber.

It just depends on the look you want. I personally like the combination of slight stretch (not meaty) and tucked (I can't stand wheel gap.)

Thanks for the info. I'm unfortunately out of country for awhile and unable to test fit and verify, so I'm not going to risk it at this point. A bit frustrating. If I had to guess, at the very least, the front will be too wide, but the rear is probably do-able since I'm running a 10.5 with 295 right now with no issue. I can only hope they're still available when I return, because I'd really like to have these on my car.

6ixSpd · 12-22-2019, 06:38 PM

275/30 street tires (ie. PSS, not Cups or AD08R etc) on those fronts will fit without a single issue, even if dropped hard.

Rear you can use a 285/30 and be fine as well. That fitment is awesome for E9X M3s.

For comparison , I am running 10" ET8 275/30 in the rear and I have no rubbing on H&R Sport Plus. Your setup would have 4mm more clearance to the fender, offset by +5mm extra tread with a 285. So it will fit virtually identically.

EJK7 · 01-27-2020, 05:59 PM

Car is lowered on K&W coil overs, can't remember offsets and widths off the top of my head but no spacers as photo'd [IMG][/IMG]

Perfectmax · 02-17-2020, 09:29 PM

Name: 20E9213B-07F7-47D3-9572-4D2512BA8D67.jpg
Views: 2947
Size: 241.7 KB

19” BBS FI’s w/ 5mm spacer on front only

Ohlins coilovers

265/285

Lienrocs · 02-21-2020, 11:49 AM

My two bbs equipped cars.

Ommmjido · 03-02-2020, 07:00 AM

LM-R in custom tinted brush finish

JP10 · 03-02-2020, 09:14 AM

Quote:

Originally Posted by Ommmjido

LM-R in custom tinted brush finish

Beautiful set of wheels man

marone · 03-03-2020, 04:05 AM

BBS CI-R matte black finished

SupremePower1 · 03-03-2020, 11:36 AM

Picked up some RI-A last year from Japan. Love the gold combination on the blue. Very happy with how it turned out

18x9.5 +27 (Effective +22)
18x10.5 +25 (Effective +20)

sterile stork · 03-04-2020, 01:19 PM

Quote:

Originally Posted by SupremePower1

Picked up some RI-A last year from Japan. Love the gold combination on the blue. Very happy with how it turned out

18x9.5 +27 (Effective +22)
18x10.5 +25 (Effective +20)

Beautiful color combo! I'm a big fan of the BBS gold on the RI-A, although I'm biased. Hah.

5mm spacer front/rear?

slicer · 03-05-2020, 10:45 AM

Some pics of the real thing from the e92 M3 GT4 factory built race car.

sterile stork · 03-05-2020, 11:06 AM

Quote:

Originally Posted by slicer

Some pics of the real thing from the e92 M3 GT4 factory built race car.

Looking great slicer!! Have you changed control arm length in the rear to accommodate lowered ride height?

slicer · 03-05-2020, 11:19 AM

Quote:

Originally Posted by sterile stork

Quote:

Originally Posted by slicer

Some pics of the real thing from the e92 M3 GT4 factory built race car.

Looking great slicer!! Have you changed control arm length in the rear to accommodate lowered ride height?

I have SPL adjustable arms all around. Not sure which arm you are referring to.

LostPanda · 03-06-2020, 09:58 AM

Quote:

Originally Posted by slicer

Some pics of the real thing from the e92 M3 GT4 factory built race car.

Wheeeeeeelp... I know what my next set of wheels are...

slicer · 03-06-2020, 10:19 AM

Quote:

Originally Posted by LostPanda

Quote:

Originally Posted by slicer

Some pics of the real thing from the e92 M3 GT4 factory built race car.

Wheeeeeeelp... I know what my next set of wheels are...

They are really economical price. Great bang for buck.

Kevin_Trxn · 03-07-2020, 04:14 PM

BBS RSII 19x9 - 9.5
225/35/19
235/35/19

slicer · 03-07-2020, 04:27 PM

Some teasers

slicer · 03-07-2020, 09:11 PM

Latest set of E88's -

Black centers with silver Cerakote lips.

18x10.5
265/35/18

18x11
295/30/18
Yokohama A052

shimmy23 · 03-08-2020, 07:54 PM

Are these bbs logos available to purchase now? I remember a bit ago authentic ones were hard to source without connections

11-05-2019, 06:46 PM	#507
slicer Major General 3066 Rep 6,809 Posts Drives: GT3 Cup, X7, G80 M3 Join Date: Jan 2009 Location: Wisconsin - Instagram - @slicer_m iTrader: (39)	Beautiful ^^ __________________ Past BMW's: E36M3, E46M3, E90M3, E92M3(x2), i3, F31 330i Touring, F87 M2CS, F97 X3M, G05 X5, Fall-Line E46 with S65 Swap Current BMW's: G07 X7, G80 M3 (LSB on Tartufo) Race Car: Porsche 992 GT3 CUP INSTAGRAM - @Slicer_M
	Appreciate 1 //steve\\1091.50 Quote

12-06-2019, 03:26 AM	#508
TechE Second Lieutenant 175 Rep 251 Posts Drives: F90 Join Date: Aug 2016 Location: Germany iTrader: (0)	I'm back again for an update/question. I passed on the RSII's I posted earlier. Great looking wheels but not the look I want. I found these LM's with lugs for an attractive price that I plan on moving forward with. But, I'm slightly iffy on fitment. Fronts are 19x10 et25 with 285/30's, and rears 19x11 et25 with 305/30's. They managed to fit on this guys E92, but his suspension looks stock. My E90 is lowered on H&R sport springs. Any cause for concern here? Second question, how hard would it be to polish the lips, à la 6ixSpd's? Thanks.
	Appreciate 0 Quote

12-22-2019, 06:38 PM	#511
6ixSpd Save the manuals! 6237 Rep 6,841 Posts Drives: '12 M3, '19 X5, '23 718 Spyder Join Date: Feb 2016 Location: 416 iTrader: (4)	275/30 street tires (ie. PSS, not Cups or AD08R etc) on those fronts will fit without a single issue, even if dropped hard. Rear you can use a 285/30 and be fine as well. That fitment is awesome for E9X M3s. For comparison , I am running 10" ET8 275/30 in the rear and I have no rubbing on H&R Sport Plus. Your setup would have 4mm more clearance to the fender, offset by +5mm extra tread with a 285. So it will fit virtually identically.
	Appreciate 1 TechE174.50 Quote

01-27-2020, 05:59 PM	#512
EJK7 Registered 8 Rep 4 Posts Drives: 2008 BMW M3 Join Date: Aug 2019 Location: canton ohio iTrader: (0)	E92 m3 on 20" LM-R's Car is lowered on K&W coil overs, can't remember offsets and widths off the top of my head but no spacers as photo'd [IMG][/IMG] Attached Images
	Appreciate 1 swanlake186.00 Quote

02-17-2020, 09:29 PM	#513
Perfectmax Private 20 Rep 52 Posts Drives: G37s Join Date: Mar 2013 Location: Wilmington, nc iTrader: (0)	19” BBS FI’s w/ 5mm spacer on front only Ohlins coilovers 265/285
	Appreciate 0 Quote

02-21-2020, 11:49 AM	#514
Lienrocs Captain 837 Rep 952 Posts Drives: E92 M3, M4 GTS, HP4 Join Date: May 2017 Location: Austin iTrader: (3)	My two bbs equipped cars. Attached Images
	Appreciate 3 slicer3066.00 ebisueight1103.00 aaa335256.00 Quote

03-02-2020, 07:00 AM	#515
Ommmjido New Member 138 Rep 22 Posts Drives: F36 Join Date: Jan 2017 Location: Hong Kong iTrader: (0)	LM-R in custom tinted brush finish Attached Images
	Appreciate 2 JP102439.00 6ixSpd6237.00 Quote

03-03-2020, 04:05 AM	#517
marone New Member 2 Rep 12 Posts Drives: m3 e92 LCI Join Date: Mar 2020 Location: Europe iTrader: (0)	BBS CI-R matte black finished Attached Images
	Appreciate 0 Quote

03-03-2020, 11:36 AM	#518
SupremePower1 249 Rep 409 Posts Drives: /// Join Date: Feb 2013 Location: So Cal iTrader: (0)	Picked up some RI-A last year from Japan. Love the gold combination on the blue. Very happy with how it turned out 18x9.5 +27 (Effective +22) 18x10.5 +25 (Effective +20) Attached Images
	Appreciate 4 sterile stork394.50 Kelse921139.00 Ben Ingraham296.00 M3E90sedan171.00 Quote

03-05-2020, 10:45 AM	#520
slicer Major General 3066 Rep 6,809 Posts Drives: GT3 Cup, X7, G80 M3 Join Date: Jan 2009 Location: Wisconsin - Instagram - @slicer_m iTrader: (39)	M3 GT4 Wheels by BBS Some pics of the real thing from the e92 M3 GT4 factory built race car. Attached Images __________________ Past BMW's: E36M3, E46M3, E90M3, E92M3(x2), i3, F31 330i Touring, F87 M2CS, F97 X3M, G05 X5, Fall-Line E46 with S65 Swap Current BMW's: G07 X7, G80 M3 (LSB on Tartufo) Race Car: Porsche 992 GT3 CUP INSTAGRAM - @Slicer_M
	Appreciate 5 sterile stork394.50 Blindside_1378972.00 aaa335256.00 B8bydesign845.00 a5m1576.00 Quote

03-07-2020, 04:14 PM	#525
Kevin_Trxn Second Lieutenant 635 Rep 299 Posts Drives: '17 340i Join Date: May 2017 Location: San Diego iTrader: (0)	Kevin_Trxn BBS RSII 19x9 - 9.5 225/35/19 235/35/19 Attached Images
	Appreciate 1 !LEFTCOAST!221.50 Quote

03-07-2020, 04:27 PM	#526
slicer Major General 3066 Rep 6,809 Posts Drives: GT3 Cup, X7, G80 M3 Join Date: Jan 2009 Location: Wisconsin - Instagram - @slicer_m iTrader: (39)	Some teasers Attached Images __________________ Past BMW's: E36M3, E46M3, E90M3, E92M3(x2), i3, F31 330i Touring, F87 M2CS, F97 X3M, G05 X5, Fall-Line E46 with S65 Swap Current BMW's: G07 X7, G80 M3 (LSB on Tartufo) Race Car: Porsche 992 GT3 CUP INSTAGRAM - @Slicer_M
	Appreciate 4 ebisueight1103.00 E46PP40.00 aaa335256.00 Atlanta ///M197.00 Quote

03-07-2020, 09:11 PM	#527
slicer Major General 3066 Rep 6,809 Posts Drives: GT3 Cup, X7, G80 M3 Join Date: Jan 2009 Location: Wisconsin - Instagram - @slicer_m iTrader: (39)	Latest set of E88's - Black centers with silver Cerakote lips. 18x10.5 265/35/18 18x11 295/30/18 Yokohama A052 Attached Images __________________ Past BMW's: E36M3, E46M3, E90M3, E92M3(x2), i3, F31 330i Touring, F87 M2CS, F97 X3M, G05 X5, Fall-Line E46 with S65 Swap Current BMW's: G07 X7, G80 M3 (LSB on Tartufo) Race Car: Porsche 992 GT3 CUP INSTAGRAM - @Slicer_M
	Appreciate 4 shimmy232538.00 LeveragedTiger143.50 E46PP40.00 Atlanta ///M197.00 Quote

03-08-2020, 07:54 PM	#528
shimmy23 F15 daddymobile 2538 Rep 3,641 Posts Drives: GS X5 Join Date: Aug 2011 Location: WA iTrader: (3)	Are these bbs logos available to purchase now? I remember a bit ago authentic ones were hard to source without connections __________________ -brandon F15 Glacier Silver journal
	Appreciate 0 Quote