Official APEX Wheels Showroom Gallery Thread

[GK77]

looking forward to my set

[ApexWheels]

18" SM-10RS

Wheels:
Forged SM-10RS
Front & Rear: 18x10 ET25

Tires:
Pirelli Pzero rain tires
Front & Rear: 285/645-18

Still Can't Find The Right Picture? Check Out Our Wheel Galleries For More Content!

[Expert@ApexWheels]

18" EC-7RS

Wheels:
Forged EC-7RS in Anthracite
Front & Rear: 18x10 ET25

Tires:
Maxxis RC-1
Front & Rear: 275/35-18

Additional Modifications:
bilstein b12 prokit suspension
vorshlag camber-caster plates
RD front sway bars

Still Can't Find The Right Picture? Check Out Our Wheel Galleries For More Content!

[ixat]

Hi would the specs in VS-5RS clear a Brembo GT 6 pot?

Front: 18x9.5" ET22 with 265/35-18 tires
Rear: 18x10.5" ET22 with 285/35-18 tires

[ApexWheels]

Originally Posted by ixat

Hi would the specs in VS-5RS clear a Brembo GT 6 pot?

Front: 18x9.5" ET22 with 265/35-18 tires
Rear: 18x10.5" ET22 with 285/35-18 tires

There are multiple Brembo GT kits available for the E9X M3. Our 18x9.5 ET22 VS-5RS clears the 1N1.9003A kit + the other rotor variants with no spacers for example. This is the most common kit you'll see run on these cars.

These wheels will not clear the 1T1.9010A 6 piston Brembo kit which is an updated caliper.

Another thing to note with these kits is that the paired rear brakes have a large mounting bolt that causes our 18" rear wheels to not clear the bolt. This applies to the following rear kits: "2P1.9013A, 2P1.9060A" REAR GT/GT-S/GT-R 4 piston 380x28mm

Hope that helps,

-Tom

[ixat]

Thanks Tom. Am considering to go 19” instead.

Would I need spacers based on specs below on the E92 M3 with ST XTA coilovers with the VS-5RS on 265/30/19 and 285/30/19

Front: 19x9.5" ET22
Rear: 19x10.5" ET22 or ET25

Originally Posted by ApexRaceParts

There are multiple Brembo GT kits available for the E9X M3. Our 18x9.5 ET22 VS-5RS clears the 1N1.9003A kit + the other rotor variants with no spacers for example. This is the most common kit you'll see run on these cars.

These wheels will not clear the 1T1.9010A 6 piston Brembo kit which is an updated caliper.

Another thing to note with these kits is that the paired rear brakes have a large mounting bolt that causes our 18" rear wheels to not clear the bolt. This applies to the following rear kits: "2P1.9013A, 2P1.9060A" REAR GT/GT-S/GT-R 4 piston 380x28mm

Hope that helps,

-Tom

[ApexWheels]

Originally Posted by ixat

Thanks Tom. Am considering to go 19” instead.

Would I need spacers based on specs below on the E92 M3 with ST XTA coilovers with the VS-5RS on 265/30/19 and 285/30/19

Front: 19x9.5" ET22
Rear: 19x10.5" ET22 or ET25

With the 19x9.5 ET22 up front, you shouldn't need any spacers to clear the ST XTA suspension or those Brembo brakes. The rear fitment would also be fine without spacers.

The rear offset for those wheels would be ET25.

-Tom

[Z33KLF]

Originally Posted by ApexWheels

Some of our customers do choose to run 18x9.5s all the way around! Our 18x9.5 ET22 is a direct fit for this application with either 265/35-18s or 275/35-18s.

Here are some photos a customer sent us with this exact setup. Big thanks to Santiago!

Wheel details:

• 18x9.5 ET22 SM-10s in Satin Black, square fitment.
• 275/35/18 RE71r's
• 15mm rear spacer (purely for aesthetics)
• Apex Red center caps

Additional mods:

• H&R Race Springs
• -1.5 degrees front and rear camber

Absolutely loving this set up

[Moutamid]

Apex EC7 Satin Bronze

F 18x9 ET31 245/40/18 12mm Spacer
R 18x10 ET25 265/40/18 15mm Spacer
Stock Suspension

[ApexWheels]

BMW E92 M3 with 18” VS-5RS in Brushed Clear

Wheels:
VS-5RS in Brushed Clear
Front: 18x9.5" ET22
Rear: 18x10.5" ET22


Tires:
Michelin Pilot Sport 4s Ultra High/Max Performance Summer
Front: 265/35-18
Rear: 285/35-18


Photo Credit:
@m.med1a










Fitment Guides

We know what fits. From direct bolt-on to all-out race fitments and everything in between. We've street and track tested extensively to save you the trial-and-error.

View our M3 guide.

[LWG]

VS-5RS 18x10.5 (3mm spacers in the rear) on Nankang CR-S 275/35/18

[TigerM3]

Originally Posted by LWG

VS-5RS 18x10.5 (3mm spacers in the rear) on Nankang CR-S 275/35/18

How much camber are you running to fit that 10.5 up front?

[LWG]

Originally Posted by TigerM3

How much camber are you running to fit that 10.5 up front?

-3.5

[CLUBBER]

APEX VS-5 RS in Brushed Clear Finish sourced by Driven34.

19x9,5 ET22 & 19x10.5 ET25 wrapped in 265/30/19-285/30/19 Michelin PS4S

[CLUBBER]

ApexWheels

[RalliartRsX]

Z

[MechEngineer408]

Will the ML-10RT in 18x10 +25 clear the AP Racing 9660?

[Expert@ApexWheels]

Originally Posted by MechEngineer408

Will the ML-10RT in 18x10 +25 clear the AP Racing 9660?

Thanks for the question. The 18x10 ET25 will clear that AP kit (13.01.10037) for the E9x M3 without any spacer required.

- Jasper

[Expert@ApexWheels]

E92 M3 Photoshoot: Ml-10RT wheels in multiple colors

The E9X M3 platform has been a chassis with some of the most interested and vocal enthusiasts asking for on-car photography of our ML-10RT wheels. Given how good they look on this E92, its easy to see why. We’re excited to feature 18” and 19” staggered fitments on this clean M3 in our Motorsport Gold and Race Silver finish. We have more shoots lined up in the future so let us know what car you’d like to see next!

18” Wheels:

ML-10RT in Machined Lip Gloss Motorsport Gold
Front: 18x9.5 ET22 - Profile 3
Rear: 18x10.5 ET22 - Profile 4


Tires:
Continental ExtremeContact Sport02
Front: 265/35-18
Rear: 295/35-18

Our most popular staggered fitment for the E9X M3. This fitment showcases a deeper wheel profile in the rear with our ML-10RT. The advantage of creating this classic design with Monoblock forged construction is that our spoke profiles can be more concave and optimized on a per fitment basis unlike 3 piece options that have a fixed spoke shape. The 18x10.5 ET22 takes full advantage of the wider rear fender arches to run a lower offset profile 4 deeply concave wheel.


The generous fenders of the E92 allow wider and low offset fitments to be run, especially on modified cars. For owners looking to run the widest rear we offer or an aggressive square track fitment, we do have an 18x11 ET25 coming for the ML-10RT line as well.

19” Wheels:

ML-10RT in Machined Lip Race Silver
Front: 19x9.5 ET22 - Profile 3
Rear: 19x11 ET44 with 12mm rear spacers - Profile 3


Tires:
Continental ExtremeContact Sport02
Front: 275/30-19
Rear: 305/30-19

This 19” staggered fitment is the other side of the staggered coin. We opted to showcase a unique option that used our popular 19x9.5 ET22 wheel up front and our 19x11 ET44 in the rear. While the rear wheel requires a spacer for ideal fitment on the E9X M3, this fitment is a great way to run the widest possible fitment on the rear of one of these cars that fills the rear wheel well without the headache of messing with the fenders.

Big thanks to our Photoshoot Volunteer for letting us shoot their car! You can follow him on IG here: @O_eddiee

If you have a clean car in the Bay Area that you’d like to see featured on Apex wheels, Feel free to submit a response to our form here.

If you like the look of these wheels, but want to see more on car photography, head over to our ML-10RT Gallery.

Want to learn more about the development of these wheels? Check out our Project Page

Pre-Order ML-10RT // Real Performance // Instagram

[VK///M3]

Just got my set of ML-10RTs today. Can’t wait to install these bad boys this weekend.

Big shout out to Tom for all the advice regarding my specs.

Apex, you guys rock!🤘🏻

____________________

- Quick Update -

Here’s my ML-10RTs Anthracite
275/35/18 ET25 & 295/35/18 ET44

I’m lovin it. 🤌🏻😎

ApexWheels

[calypsoe36]

Some fresh ML-10's. They look great in-person! Will need to get some quality photos soon. Motorsport Gold is very subtle, especially with this mesh style. A nice change of pace from the 359s.

18x9.5 ET22
18.10.5 ET22
Michelin PS4S 265/35, 285/35
Stock ZCP suspension (maybe Santa will bring some Ohlins??)

And, most importantly, the OE self-leveling roundels fit perfectly.

[ApexWheels]

Originally Posted by VK///M3

Just got my set of ML-10RTs today. Can’t wait to install these bad boys this weekend.

Big shout out to Tom for all the advice regarding my specs.

Apex, you guys rock!🤘🏻

No problem! Enjoy the wheels!

Originally Posted by calypsoe36

Some fresh ML-10's. They look great in-person! Will need to get some quality photos soon. Motorsport Gold is very subtle, especially with this mesh style. A nice change of pace from the 359s.

18x9.5 ET22
18.10.5 ET22
Michelin PS4S 265/35, 285/35
Stock ZCP suspension (maybe Santa will bring some Ohlins??)

And, most importantly, the OE self-leveling roundels fit perfectly.

I love the gold as well. I just got motorsport gold ML-10RTs mounted on my personal car and it's a great color. I'm normally not a bold wheel color type of person but its subtle enough to really blend in.

-Tom