Sponsored by The Tire Rack

[DL335D]

Originally Posted by bananabun

Thanks. Is that because you had to or you wanted to? Just want to make sure I'm ready to mount them when they arrive. I currently do now have any spacers.

Didn't need to run them just wanted the rears super flush.

[Bigtriece]

Originally Posted by DL335D

I have pretty much this same setup with Eibach's. I'm running 15mm rear only.

This looks great! I just pulled the trigger on some 18x10 ARC8's. Was planning on swapping my 15mm rear for a set of 12mm. Looks like 15mm will run just fine with 275/35. I'm on swift's so should be pretty similar to your eibach's.

Any more pictures from the rear?

[DL335D]

Trust me. 15s are the way to go.

[Bigtriece]

Originally Posted by DL335D

Trust me. 15s are the way to go.

Thanks! Looks great!

[Bigtriece]

ARC-8 Square
18x10 ET 25
275/35/18 Hankook V12's
Swift Springs
15mm Rear Spacer

[DL335D]

^ looks perfect man. Swifts provide just about the same drop as eibach's.

[Bigtriece]

Originally Posted by DL335D

^ looks perfect man. Swifts provide just about the same drop as eibach's.

Thanks dude. Might throw a 5mm front spacer on.

[DL335D]

^ I have a set of 5mm spacers and was thinking about doing the same. If you do it upload a few pics.

[Bigtriece]

Originally Posted by DL335D

^ I have a set of 5mm spacers and was thinking about doing the same. If you do it upload a few pics.

Just ordered some.

Will post pics when I put them on.

[Bigtriece]

Originally Posted by DL335D

^ I have a set of 5mm spacers and was thinking about doing the same. If you do it upload a few pics.

5mm front installed. Looks perfect. I've got my alignment pins pulled also.

[waterpanda]

Finally got to slap on the SM10's

Wheels:
18x10 square, 12mm spacers in rear, wrapped in Hankook RS4 275/35/18's

Suspension:
OEM EDC struts, ZCP springs, fixed Dinan camber plates in front

[Crazy8.M3]

SM-10
19x9 ET30 - Michelin PS4S 255/35
19x10 ET25 - Michelin PS4S 275/35

Future Classic Spacers
12mm front
10mm rear

Stoptech BBK

[DL335D]

Awesome pic and car.

[icanturn]

What a shot. Love your headlights too.

[PipeWerks_BKK]

335i M3 conversion

Arc-8 : F 18x10 et25 + 265/35r18
R 18x10 et25 + 285/35r18

No spacers. I found the front 265 tires were a bit too narrow. A 285 all round should work great.

Brembo 19z calipers + 380mm discs fit perfectly well.

[ApexWheels]

Originally Posted by AdM1nsarEas$

Anyone running 17s lately? Have seen the older pics but want to see some fresh 17 blood

Thanks for asking, our customer Bryant just sent in some amazing shots of his pre LCI E90 335i on a staggered set of 17" ARC-8s in Anthracite.

APEX Wheel Fitment Specs:

• Front:17x9" ET30 with 245/40-17 and 3mm spacer for strut clearance
• Rear: 17x10" ET25 with with 275/40-17 and a rear fender roll
• Tires: Firestone FireHawk Indy 500

Alignment:

-Ian

[M3atman]

Pic request...Anyone running square setup Arc-8 or EC :18x10 et25 with 285/35 all around? I'm lowered on OHLINS but I think it will fit fine...

[endur0]

ec-7r
18x10 et25
265 35 18 SC3R
stock suspension, alignment

[Crazy8.M3]

Changed up the color.

SM-10
19x9 ET30 - Michelin PS4S 255/35
19x10 ET25 - Michelin PS4S 275/35

Future Classic Spacers
12mm front
10mm rear

Stoptech BBK

[ApexWheels]

Originally Posted by Crazy8.M3

Changed up the color.

SM-10
19x9 ET30 - Michelin PS4S 255/35
19x10 ET25 - Michelin PS4S 275/35

Future Classic Spacers
12mm front
10mm rear

Stoptech BBK

Looks amazing!!

-Ian

[Crazy8.M3]

Originally Posted by ApexRaceParts

Looks amazing!!

-Ian

Thank you, appreciate it! Love how they came out.

[Mumen Rider]

I made an account just to comment on this thread. How does the Apex Arc 8's look on a stock e90 M3? Basically any setup that doesn't require spacers or camber plate. Do spacers provide a much superior look?