What have you done with or to your M3 today?

[gsxrliterbikz]

Just did that to mine. Those plastic belly pan parts aren't cheap.

[fhaze3]

Had new PSS's shipped to my home 255/275, made dealership appt to M/B/A...drove home with an '14 F10 M5 CP with CPO..it was the damned-est thing!

[BigRussia]

Installed ZHP Knob and RedlineGoods leather shift boot. Ended up having to take apart the stock boot anyway to reuse the trim ring, and had to cut tab holes in the redlinegoods boot to mount it to the ring. But other than that I'm pretty happy with everything. The ZHP knob is an improvement over the stock knob albeit a small one. Throws are only slightly shorter but the weight does help with the notchiness. I carried it over from my 135i where the improvement wasn't very noticeable since it came with the M Sport package shift knob which was already pretty short and weighted.

[pooyab]

Originally Posted by fhaze3

Had new PSS's shipped to my home 255/275, made dealership appt to M/B/A...drove home with an '14 F10 M5 CP with CPO..it was the damned-est thing!

Yea. Sucks when things don't go as planned

[Tewie]

Originally Posted by gsxrliterbikz

Just did that to mine. Those plastic belly pan parts aren't cheap.

Did you use aftermarket parts? Just ordered one from ECS for $390

[gsxrliterbikz]

Originally Posted by Tewie

Did you use aftermarket parts? Just ordered one from ECS for $390

No. Dealer. I replaced the big pan and the small side pieces for around 350. Including a bunch of small clips and screws and new serpentine belts.

[6ixSpd]

Installed 1x1 weave CF mirror caps! Matches the roof and diffuser perfectly. Too bad my front splitters are the only 2x2 CF on the car...

[FMLYSDN]

Originally Posted by the6M3

Installed 1x1 weave CF mirror caps! Matches the roof and diffuser perfectly. Too bad my front splitters are the only 2x2 CF on the car...

Where did you get the mirror caps?

[Tewie]

Originally Posted by gsxrliterbikz

No. Dealer. I replaced the big pan and the small side pieces for around 350. Including a bunch of small clips and screws and new serpentine belts.

Dealer wanted me to pay 320 for the main piece and an extra 115 per side piece

[RoundelObsession]

Originally Posted by 4M

Installed RKP GTS rear wing

Did you buy the RKP wing new, if so does it come with weld-in reinforcements?

[6ixSpd]

Originally Posted by FMLYSDN

Where did you get the mirror caps?

From JBSpeed. They're full replacements, not overlays. Can't go wrong at $260 shipped! They arrived in Canada pretty quickly as well.

I'm 99% sure these are the same as the Autoteknic ones. I prefer these over OEM because they're 1x1 weave.

[gsxrliterbikz]

Originally Posted by Tewie

Dealer wanted me to pay 320 for the main piece and an extra 115 per side piece

Yikes.

Time to find a new dealer. I was under 4 for everything I listed and they shipped it to my door.

[BigRussia]

Installed Lamin-X clear headlight cover film to protect my headlights from all the road debris and bugs that have been chipping them from highway driving. Had the car less than 2 months and the lenses already have scuffs and chips and even a few deep craters. The kit was $52 shipped and came with squeegee, spray bottle, and cutting knife. Really happy with how they came out, no cloudiness, bubbles, or wrinkles! Cant even tell they're on there

[///MPower15]

Originally Posted by BigRussia

Installed Lamin-X clear headlight cover film to protect my headlights from all the road debris and bugs that have been chipping them from highway driving. Had the car less than 2 months and the lenses already have scuffs and chips and even a few deep craters. The kit was $52 shipped and came with squeegee, spray bottle, and cutting knife. Really happy with how they came out, no cloudiness, bubbles, or wrinkles! Cant even tell they're on there

Where did you order it from? Would love to do it on mine.

[4M]

Plus 10 for LaminX (they have a website). I ordered yellow and love the protection and the look on a tracked car.

[BigRussia]

Originally Posted by ///MPower15

Where did you order it from? Would love to do it on mine.

Originally Posted by 4M

Plus 10 for LaminX (they have a website). I ordered yellow and love the protection and the look on a tracked car.

Yep bought direct from their site, there's also a coupon code on there for 10% off.

Yeah I was thinking they'll really be put to the test when I do my first track day, also now I won't have to blue painter tape my headlights like a noob.

[buddalun]

Originally Posted by 4M

Plus 10 for LaminX (they have a website). I ordered yellow and love the protection and the look on a tracked car.

I really like your garage and car; the restraint and execution are laudable.

Carry on.

[///MPower15]

Originally Posted by 4M

Plus 10 for LaminX (they have a website). I ordered yellow and love the protection and the look on a tracked car.

Originally Posted by BigRussia

Yep bought direct from their site, there's also a coupon code on there for 10% off.

Yeah I was thinking they'll really be put to the test when I do my first track day, also now I won't have to blue painter tape my headlights like a noob.

Thanks guys! Just ordered them

[4M]

Thank you Buddalun.
Will do.

[briancl]

Originally Posted by 4M

Plus 10 for LaminX (they have a website). I ordered yellow and love the protection and the look on a tracked car.

Looks awesome! Where did you get the rack for storing wheels?

[4M]

Mine was a gift from my wife and is from Tire Rack. It is on lockable wheels, holds two sets and was about $300. They also sell a wall mountable version that would free up more floor space if yours is at a premium, but it only holds 4-5 tires depending on their size. It's about half the price. Both are really sturdy and well made. http://www.tirerack.com/accessories/...y=Tire+Storage

[CHE///MIST3]

All I did was drive mine to work today! ....like I do everyday, and it was amazing.


GM