Sponsored by The Tire Rack

[e92BMW///M3]

Back with another set of RI-As, this time square.

[TboneS54]

Finally fitted proper sized tires (265/285 ps4s on 9.5/10.5" e88)

Now, I need to get the ohlins installed and lower the rear end a touch.

[Narvin]

My jet black on black

10.5 square 285/30

[xaappx]

Just got my 19" BBS Ri-D

[ethhaynes7]

Gold BBS RIA 18x10 et25 265/35, 18x11 et37295/30. 12.5 spacer only in rear

[bgexpress]

E05

[derbo]

Originally Posted by Narvin

My jet black on black

10.5 square 285/30

What wheels are these?

[M3E90sedan]

Originally Posted by bgexpress

E05

Silly question but are these 18” or 19”? I used to have 18” E05 but they looked smaller than this. Thanks!

[bgexpress]

Originally Posted by M3E90sedan

Silly question but are these 18” or 19”? I used to have 18” E05 but they looked smaller than this. Thanks!

19”!

[M3E90sedan]

Originally Posted by bgexpress

19”!

Nice, thanks! I thought the lip looked a little larger. Looks awesome!

[kaiv]

My beater on RI-As

[DulinsE92]

Running 18x10.5 +22 Square with a 275/35/18 MPS4S
5mm front/10mm Rear Spacer

[HSHTGM3TOO]

Track setup:

SQ 18x10 ET40 BBS RE1243
SQ 20mm spacers
F - 265/35/18 AD09
R - 285/30/18 AD09

[onedubdub]

hey everyone, I just picked up an e92 that came with a F80 brake retrofit on front and rear. Does anyone here know if 18" RI-A's will clear those brakes?

[kaiv]

Originally Posted by onedubdub

hey everyone, I just picked up an e92 that came with a F80 brake retrofit on front and rear. Does anyone here know if 18" RI-A's will clear those brakes?

Yep!

[FormerRotor]

Love this photo thread! FYI to all: I'm going to be pulling my Custom-Finished BBS RG-Rs out of storage and listing for sale by the end of the month. It was a very aggressive setup for our E90 LCI 335d, but I'm pretty the specs are on-point for the M3 crowd...
Front: 19x8.5 ET32 BBS RG-R custom finished in Midnight Blue / Mag Blue
Rear: 19x10 ET25 BBS RG-R custom finished in Midnight Blue / Mag Blue
Custom Finished in Volk Racing Mag Blue as seen here (SORRY IT'S NOT AN M3!): https://www.e90post.com/forums/showp...77&postcount=3

If you google "midnight blue BBS RG-R" they are just about the only ones around

[MineralWhiteF80]

Originally Posted by FormerRotor

It was a very aggressive setup for our E90 LCI 335d, but I'm pretty the specs are on-point for the M3 crowd...
Front: 19x8.5 ET35 BBS RG-R custom finished in Midnight Blue / Mag Blue
Rear: 19x10 ET25 BBS RG-R custom finished in Midnight Blue / Mag Blue

The front 8.5 +35 wheel is not a very good fit for an e9x M3 and is much better suited for a non-M e9x car. That offset isn't aggressive enough, and the wheel width isnt an upgrade for wider tires if performance mattered. You would need a 5mm to 7.5mm spacer just to get it to fit like a stock front m3 wheel, and most people run 15mm to 20mm spacers up front on the stock wheels to get them to fit better. For a flush fitment with an 8.5" +35 wheel, you would need to run a 35 mm spacer which, IMO, is too much for a street car. Otherwise, the wheel will look very pushed into the wheel well.

The rear 10" +25 will fit better. For a flush fitment, on an e9x m3, you would want to run a 10mm or 12mm spacer and a 275/35 tire.

[FormerRotor]

Originally Posted by MineralWhiteF80

...For a flush fitment with an 8.5" +35 wheel, you would need to run a 35 mm spacer which, IMO, is too much for a street car. Otherwise, the wheel will look very pushed into the wheel well.

The rear 10" +25 will fit better. For a flush fitment, on an e9x m3, you would want to run a 10mm or 12mm spacer and a 275/35 tire.

Thanks, Mineral! I know some folks like to go for super-flush, but (and I could be wrong here)...
Aren't the standard e90M3 Wheels...

• Front: 19x8,5J x 19" ET29
• Rear: 19x9,5J x 19" ET23

...And the competition wheels...

• Front: 19x9" ET31
• Rear: 19x10" ET25

...so with a 7mm spacer in the front I think these RGR's would sit identically (from a "flushness" standpoint) to the OEM competition wheels. From a width standpoint they'd offer similar-to-better sidewall support vs the standard OEMs, but...RGRs!

I get your points, though. Regardless: Don't want to thread jack, so MOAR awesome M3 BBS Photos Please!

EDIT: Correction, I was rusty on the wheel specs of my wheels. The Fronts are ET32, not ET35. Numbers corrected above.