|
|
04-16-2023, 05:35 PM | #1 |
Private First Class
30
Rep 155
Posts |
Programming M button to an aftermarket button
I plan on installing an aftermarket steering wheel and wondering if there’s a way to program the m button to an aftermarket button.
I thought it would be as straight forward as tracing and replicating the wiring, but it appears the stock button triggers multiple signals on the circuit board to send a special signal. |
04-16-2023, 09:24 PM | #3 |
Private First Class
30
Rep 155
Posts |
|
Appreciate
0
|
04-16-2023, 09:35 PM | #4 |
Derbo Tuning
3657
Rep 3,049
Posts |
You probably need to learn CANBUS and how to send and receive signals via the multiplexer signals. You can probably use a CANBUS sniffer and determine those items.
__________________
IG:ruhrohz_m3
Journal: Link E9x ZCP Suspension Info: Link Track Chat Discord: https://discord.gg/VsKbTyqBVj |
Appreciate
0
|
04-18-2023, 02:38 PM | #5 |
Captain
580
Rep 685
Posts |
The M Button triggers the SZL to send an on/off CAN packet that the DME picks up, and updates it's broadcast of the mode selection packet. You would need to inject the CAN packet from the SZL onto the CAN to make an external button work.
The other buttons on the steering wheel work by creating a constant current loop that goes directly through the clock spring to the JBBF. |
Appreciate
1
derbo3656.50 |
05-15-2023, 02:25 PM | #6 |
Dont listen to me
908
Rep 648
Posts |
The face I make when I realize the M Button triggers the SZL to send an on/off CAN packet that the DME picks up, and updates it's broadcast of the mode selection packet, and it's literally the only important button on the steering wheel that I need.
|
Appreciate
0
|
Post Reply |
Bookmarks |
|
|