|
|
05-14-2022, 07:28 PM | #793 | |
New Member
9
Rep 12
Posts |
Quote:
This camera is working great, and was easy to install (as far as running the cabling is "easy" for any backup camera). I like it because it just needs the RCA camera connection and the Power from the Mr12Volt...no need to hook into a backup-light/tail-light for power. You just set Mr12Volt to use the gear position, and it will power the camera when you put the car in reverse. There is no need for a ground wire connection. You will want to snip the lead for the guide lines generated by the camera, since Mr12volt provides the dynamic lines. Also, recommend a straightened coat-hanger and some vasoline petroleum jelly to get the cable thru the cable conduit on the right side of the trunk. I'd check out the BimmerTech video on You-tube for a good E93 backup camera installation tutorial... My only issue is that I need to adjust the camera (somehow) in it's mount, as currently it is showing my bumper taking up about 1/5th the screen at the bottom. I think the camera itself needs a little seating adjustment in its trunk-mount plastic housing. I'll get to it as time permits, but removing all the plastic pins on the E93 trunk lid is a pain, and you need to do that to get to the camera. Hope this helps. Finny Last edited by finbarr.cnaipe; 05-14-2022 at 07:37 PM.. |
|
Appreciate
0
|
05-14-2022, 09:34 PM | #794 |
New Member
2
Rep 16
Posts |
Purchase a camera that is of AHD720, to my understanding, it does not support above that. And adjust "aftermarket cam" in the camera setting.
|
Appreciate
0
|
05-15-2022, 12:06 PM | #795 |
Registered
0
Rep 3
Posts |
I just installed Mr12volt dsp in my 09 e92 335i. It works great and thought it was all good but ran into a little hiccup after the install. My A/C is acting weird. It feels like it is only controlling the blower. When I try to change the direction of the air to the floor the button lights up but nothing happens and air still comes out the top. Condenser isn’t turning on either, even with the snowflake button lit. I checked the connections and they look fine so not sure what the issue could be. I know the unit doesn’t involve the ac control so I must have screwed something up putting it back together. Any thoughts on how to fix this?
|
Appreciate
0
|
05-15-2022, 12:17 PM | #796 | |
Brigadier General
3941
Rep 3,986
Posts |
Quote:
M3s have 3, not sure if yours will be different.
__________________
|
|
Appreciate
0
|
05-15-2022, 12:39 PM | #797 |
Registered
0
Rep 3
Posts |
|
Appreciate
0
|
05-16-2022, 11:47 AM | #799 |
New Member
5
Rep 15
Posts |
I can't figure out what is wrong with mine. I have reached out to Mr12volt through whatsapp and he is also trying to figure out why mine is not working. I thought I would post here to get some ideas or suggestions. My car is a 2011 E90 M3. There is no 6 disc external cd changers. I am using the new mr12volt with DSP
I have attached all the cables and coded with bimmercode My MOST Connection https://youtube.com/shorts/hU7UA3JzM0U?feature=share My LVDS Connection https://youtube.com/shorts/DswrkETvKKw?feature=share When i go to CD1 https://youtube.com/shorts/F0xEcz7X2pI?feature=share Any advice or suggestions will be greatly appreciated. Last edited by Vexter182; 05-16-2022 at 01:00 PM.. |
Appreciate
0
|
05-16-2022, 12:47 PM | #800 |
New Member
2
Rep 5
Posts |
Got latest Mr12Volt "BMW CIC CarPlay & AA Interface with DSP" for my 2013 E92 M3 but couldn't get it to work (similar to Vexter182's problem). Cannot get to the P2000 menu; iDrive knob stops working and lost bluetooth. I have NOT coded anything; Is that what I'm missing?
My CIC/HU is a model BMW 6512 CI928343001. Any insight/feedback greatly appreciated while I wait for Mr12Volt's reply to my email/chat-message. |
Appreciate
0
|
05-16-2022, 12:51 PM | #801 | |
Brigadier General
1538
Rep 3,331
Posts |
Quote:
__________________
Current: '20 X5, '18 M3 ZCP
Previous: '11 E90 335i, '11 E90 M3, '16 VW GTI, '15 M235i, '13 335i, '08 TL-S, '00 Corvette |
|
Appreciate
1
eap0011.50 |
05-16-2022, 01:08 PM | #802 |
New Member
2
Rep 5
Posts |
Thx Cyberdemon;
Checked/double-checked iDrive plug and it is working but, gets to a point that it doesn't do anything. Screen shows video (tells me LVDS connection is OK), which I can switch from radio to CD using steeling wheel buttons but nothing else. Cannot get to P2000 screen from CD1. Looks like when P2000 takes over, it kind of locks. the power LED in the P2000 is red: not sure if that's good or bad (brand new latest P2000 model). |
Appreciate
0
|
05-16-2022, 01:48 PM | #803 | |
Major
1038
Rep 1,046
Posts |
Quote:
1. The unit powers up, and your idrive controller works in CIC. This means canbus/idrive controller cable is all good. 2. You have video, which means the LVDS cable is working correctly. 3. The unit shows up in CIC, and shows the right info. This means MOST is working correctly, and coding is right. What it sounds like isn't happening, is the video cutover is not being triggered. Basically the p2000 is running, it just hasn't hijacked the LVDS signal. Normally, when this happens, you can hear a relay click in the box. When you select the unit from the CIC menu- do you hear a relay click on the p2000 box? Lastly, What are your dip switch settings? Are you positive they are correct? |
|
Appreciate
0
|
05-16-2022, 03:46 PM | #804 |
New Member
5
Rep 15
Posts |
I got it to work. I went to external devices and then back to CD1 and then it triggered the box.
If anyone wants to see how the cables are supposed to be set up, just take a look at my videos Now its time to install the rear view camera EDIT: drwankel, thank you for going through everything and explaining it to me. It made me realize that I need to try triggering the box again Last edited by Vexter182; 05-16-2022 at 09:49 PM.. |
Appreciate
0
|
05-17-2022, 10:54 AM | #805 | ||
Private
146
Rep 77
Posts
Drives: 2009 BMW M3 E93, many more
Join Date: Jun 2021
Location: San Ramon, CA & Weeki Wachee, FL
|
Quote:
Quote:
Thank you Sir!!!
__________________
2009 E93 M3, Alpine White, Harrop S/C, BE Bearing Upgrade, ARP Custom Age 625+ rod bolts, Billet DCT Pan and Side Cover, Billet filter cover, Topspeed Quad Resonated 63mm X-pipe, Vangaurd Ti exhaust, 19" BBS Fi's, BPM DCT Tune, BPM Harrop Tune, almost every known early Failure/Leaky item brand new, Mr. 12V DSP MM Upgrade, CF Splitter & Diffuser, P3 Custom Multi Gauge, Lumar Ceramic Tint, 3M PPF
|
||
Appreciate
1
DrFerry6728.50 |
05-17-2022, 02:52 PM | #807 |
Major
1038
Rep 1,046
Posts |
|
Appreciate
0
|
05-17-2022, 05:01 PM | #808 |
Private
47
Rep 56
Posts |
I’ve got the new unit but getting an occasional audio tick or click. Its there all the time even when playing a video on USB. Never got this with old unit.
Sound is great and this is a minor annoyance but would be good to fix it. Anyone else noticed this? Any pointers on what to check? |
Appreciate
0
|
05-17-2022, 06:27 PM | #809 | |
New Member
2
Rep 5
Posts |
Quote:
Had to forcefully plug-it-in to the point that almost broke the whole iDrive assembly!?!
Will search M3posts and continue troubleshooting this week... |
|
Appreciate
0
|
05-17-2022, 06:56 PM | #810 | |
Major
1038
Rep 1,046
Posts |
Quote:
|
|
Appreciate
0
|
05-17-2022, 06:59 PM | #811 | |
Major
1038
Rep 1,046
Posts |
Quote:
I can't say Ive experienced anything like this, but if you push the DSP settings too far you can get some distortion which might be what you are describing. Difficult to say without hearing it. |
|
Appreciate
0
|
05-17-2022, 07:25 PM | #812 | |
Private
13
Rep 50
Posts |
Quote:
This leads me to think its a coding relating problem. Anyone else having the issue or is it working for others? Any ideas what it might be as my Siri button works (as i coded that out) Cheers |
|
Appreciate
0
|
05-18-2022, 02:40 AM | #813 | |
New Member
11
Rep 29
Posts |
Quote:
Would be great if it did as it is always a bit of a race to pick up the call with the idrive controller before it rings out |
|
Appreciate
0
|
05-18-2022, 10:56 AM | #814 |
New Member
5
Rep 23
Posts |
I have a problem that Siri does not respond to the voice button. When I code SVS it works in the CIC system. When I code away SVS, Siri still does not work.
Does anyone know what the problem is here? Thanks Übersetzt mit DeepL (https://www.deepl.com/app/?utm_medium=ios-share) |
Appreciate
0
|
Post Reply |
Bookmarks |
|
|