|
|
06-17-2020, 09:17 PM | #1 |
Captain
720
Rep 877
Posts |
I am listing my M3 for sale. The car currently sits at just over 38k miles. I bought the car a year and a half ago, bone stock. I have done all the modifications to the car during my ownership. I was planning on keeping it indefinitely but I may have new toy on the way and need space in the garage. I took inspiration from the Schirmer GT cars but unfortunately the car has never seen a second of track time in my ownership and the previous owners never tracked it either. I have all service records from the car, since new. All work on the car has been done by MRF engineering in Irvine, CA. I have receipts for all parts and labor put into the car. I can add them up for any prospective buyer but I'm a little afraid of seeing the total. Mods list is as follows, though I'm sure I'm missing some things: Suspension/brakes: -Ohlins TTX (TTX 36 front 650 pound springs, ILX 36 rear 800 pound springs with helpers, divorced). -Full SPL Catalog -Hotchkiss sway bars front and rear -MRF Solid subframes bushings -MRF Kinematics, he worked some of his witchcraft and did some track width modifications. -AP Essex 9660/9449, spiegler lines. -Ferodo DS2500 pads -SRF brake fluid Wheels/tires: E88's 18 by 10, 18 by 11 Yoko A052 265/35, 295/30 (no track time) Driveline: -OE Group N motor mounts -New OE trans mounts -Mfactory carbon DS -Powerflex purple diff bushings Engine: -Karbonius intake (new version with the shorter intake stacks, zero rubbing with perfect fitment) -Akrapovic GT4 exhaust (Akra Evo front pipes with all four O2 sensor bungs, GT4 X. I had to buy a full GT4 system and full Evo system to combine the parts I wanted to retain all O2 sensor functionality). -BPM tune -Full Do88 Coolers (Radiator, Oil Cooler, Power Steering cooler, and DCT cooler) -Slon DCT pan -Bearings done by MRF about 2500 miles ago -Vac Baffled sump (that's the only drawback to the car. There is a small crack in the pan, I think VAC put too much heat into the pan when they welded it and it warped. I am working on finding the best solution to correct the problem but the car is perfectly functional with no risk of failure as is) Exterior: -Car has a few small blemishes in the door that can be filled. -Could also use a paint correction once the small Knicks are filled and the exterior would be flawless. -IND oe, brand new in box, painted euro bumper that will go with the car. Interior: -KMP quick detach wheel -Currently has Recaro 2700g seats (I don't think these will go with the car, I have another plan for them in a different car so I will swap out the seats to some other bucket seat with BK mounts and OE sliders at the buyers request once a deal has been struck). I know that everyone will comment I need to part the car out but I really want to avoid that if possible. The car has been painstakingly put together and I drew knowledge through some of the most respected members in the BMW community to make sure the car was going to be as good as any M3 can possibly be. Taking it apart will absolutely break my heart. I'd rather it end up with someone who will appreciate it and use it to its fullest potential. Please feel free to ask any questions. Anyone local is more than welcome to come see and experience the car in person. |
06-17-2020, 10:01 PM | #7 |
Captain
989
Rep 981
Posts |
This is perfect! I've been following along on instagram for a little while now; sad to see it go. I plan to replicate this build, almost exactly on an E90 -- although I would probably save ALOT of money by just purchasing this car now, already built. Regardless, GLWS!!
|
Appreciate
1
Lienrocs719.50 |
06-17-2020, 10:07 PM | #8 | |
Captain
720
Rep 877
Posts |
Quote:
Thanks for the kind words! |
|
Appreciate
1
911r989.00 |
06-17-2020, 10:16 PM | #9 | |
Captain
989
Rep 981
Posts |
Quote:
|
|
Appreciate
0
|
06-17-2020, 10:18 PM | #10 | ||
Captain
720
Rep 877
Posts |
Quote:
|
||
Appreciate
1
911r989.00 |
06-18-2020, 07:23 AM | #13 |
Major General
2760
Rep 6,735
Posts
Drives: 'E46 M3 Race Car, '23 X7
Join Date: Jan 2009
Location: Wisconsin - Instagram - @slicer_m
|
Beautiful car with all of the best parts. I'm proud to have been part of this build. Great deal.
__________________
'23 X7
'04 M3 - Fall Line Motorsports Built Race Car - S65 swap, Dry Sump, Bosch Stand-Alone ECU, Drenth Sequential Trans, MCS 3-Way, Flossmann Wide Body, Brembo Motorsports Brakes, Drexler LSD, BBS E88 Etc. INSTAGRAM - @Slicer_M |
Appreciate
1
Lienrocs719.50 |
06-18-2020, 10:27 AM | #15 |
Second Lieutenant
67
Rep 287
Posts |
Personally driven this car and sat passenger through the canyons, can vouch this is a one off build no expenses spared. I've never felt or been in a car so planted around the turns. Bump for legit seller!
__________________
IG: lowkey_domm
|
Appreciate
1
Lienrocs719.50 |
06-18-2020, 10:33 AM | #16 |
Captain
720
Rep 877
Posts |
|
Appreciate
0
|
06-18-2020, 12:32 PM | #17 |
Brigadier General
1477
Rep 3,040
Posts |
Absolutely perfect.
__________________
INSTAGRAM: GORDON.M3
North American Mr12Volt Carplay/Android Auto Distributor DINAN | EVOSPORT | VAC | ARP | RD SPORT | NEEZ | EIBACH | CSF | IND | BILSTEIN | KLASSEN | BREMBO | ENDLESS | BBS | BPM SPORT | PROJECT MU | EVENTURI |
Appreciate
1
Lienrocs719.50 |
06-19-2020, 01:49 AM | #22 |
Captain
720
Rep 877
Posts |
|
Appreciate
0
|
Post Reply |
Bookmarks |
|
|