|
|
|
KEEP M3POST ALIVE BY DOING YOUR TIRERACK SHOPPING FROM THIS BANNER LINK! |
Post Reply |
|
Thread Tools | Search this Thread |
04-06-2011, 05:11 PM | #1 |
Colonel
145
Rep 2,018
Posts |
Running non M offsets on M car
Hi Fellow Members,
I was wondering if I tried to run this setup on a M car, besides not being aggressive enough are there any other concerns? Besides spacers, is there anything else that needs to be done to run this setup? Or rather, is it possible to run this setup? Fronts: 18 X 8.5 ET 32 with tires 235/40/18 Rears: 18 X 9.5 ET 35 with tires 265/35/18 Since Stock Front is 18 X 8.5 is ET 29 do I just need a 3mm spacer? longer bolts? Since Stock Rear is 18 X 9.5 is ET 23 do I just run a 12mm spacer? longer bolts? Last edited by Gtrain; 04-06-2011 at 05:29 PM.. |
04-06-2011, 07:12 PM | #2 |
Major General
2760
Rep 6,735
Posts
Drives: 'E46 M3 Race Car, '23 X7
Join Date: Jan 2009
Location: Wisconsin - Instagram - @slicer_m
|
The tires are too small. OEM is 245/40 and 265/40. I don't know why you would want to go with a smaller tire than OEM.
__________________
'23 X7
'04 M3 - Fall Line Motorsports Built Race Car - S65 swap, Dry Sump, Bosch Stand-Alone ECU, Drenth Sequential Trans, MCS 3-Way, Flossmann Wide Body, Brembo Motorsports Brakes, Drexler LSD, BBS E88 Etc. INSTAGRAM - @Slicer_M |
Appreciate
0
|
04-06-2011, 08:30 PM | #3 |
Colonel
145
Rep 2,018
Posts |
|
Appreciate
0
|
Post Reply |
Bookmarks |
Thread Tools | Search this Thread |
|
|