|
|
05-09-2020, 02:26 AM | #24 |
Private
30
Rep 64
Posts |
Thread resurrection! I have successfully done these steps and even copied the values across to CAS, FRM and NFRM as backups.
My question is... If using the stock seatbelt receptacles, why can't I have the contact and pretensioners activated? I have tried to set them to active and plug them in but they still throw errors. Only unplugging them and setting them to not active seems to work... |
Appreciate
0
|
05-13-2020, 09:51 PM | #25 | |
Save the manuals!
6053
Rep 6,758
Posts |
Quote:
GURTKONTAKT_BEIFAHRER_1 -Seat belt contract/connection (passenger) GURTKONTAKT_FAHRER_1 -Seat belt contract/connection (driver) GURTSTRAFFER_BEIFAHRER_1 -Seat belt tensioner, active restraint (passenger) GURTSTRAFFER_FAHRER_1 -Seat belt tensioner, active restraint (driver) You should have no problems. I have stock receptacles and didn't modify the above parameters. Zero issues in my Recaro setup.
__________________
'16 M3 | '23 718 Spyder Past: E92 M3, F87 M2, E39 M5, etc |
|
Appreciate
0
|
05-23-2020, 01:29 PM | #26 |
Second Lieutenant
116
Rep 202
Posts |
I've tried using NCSExpert with the BMW Coding Tool, and NCSDummy.
I'm using the KDCan cable that I got when I ordered the DCT GTS tune from AlpineMSS, so I'm certain the cable works (at least did work) Have no problem changing the required options in the BMW Coding Tool and NCSDummy, and am able to save the MAN file in either one. My problem seems to be that NCSExpert is either not actually writing the MAN file to the car, or the cable isn't allowing it to do so. I've even viewed the TRC file in NCSExpert and the options that I want are checked appropriately, so it seems that the file that NCSExpert is using is the one that I want. But, I've probably hit "execute job" 20 times, and the airbag/seat belt lights will not go away. I'm stumped. I've tried using the FSW PSW profile (with the manipulation box checked), the ExpertMode profile, and the NCSDummy profile. All of them allow me to "code" the car, execute the job, tell me that coding has ended, but the lights don't go away. I've cleared all codes using INPA after every attempt at coding, and I've cycled the key as well as started/stopped the car several times along the way. Any help appreciated. |
Appreciate
0
|
05-23-2020, 09:30 PM | #27 |
Save the manuals!
6053
Rep 6,758
Posts |
Scan MRS5.PRG using Tool 32 and report what errors are being thrown.
If you're still having trouble, I can remote in with TeamViewer and take a look.
__________________
'16 M3 | '23 718 Spyder Past: E92 M3, F87 M2, E39 M5, etc |
Appreciate
0
|
05-24-2020, 06:34 AM | #28 |
Second Lieutenant
116
Rep 202
Posts |
|
Appreciate
0
|
05-24-2020, 10:46 PM | #29 |
Second Lieutenant
116
Rep 202
Posts |
Well, that was so tedius, but I finally got it. My problem primarily stemmed from the fact that I'd also removed my side air bags, which means you need to deactivate a few more lines. Took me quite a while to figure that out.
|
Appreciate
0
|
05-26-2020, 05:29 AM | #30 |
Private First Class
250
Rep 108
Posts |
Hi
I mounted Recaro Profi SPG XL-s instead of OEM sofas. These are the same seats as M3 GTS has, no airbags. So there is a solution. My mechanic coded it easily. I have also seen resistor terminal solution, plugged in to under-seat airbag connector. Some seat suppliers sell them with the seat.
__________________
M3 E92 ZCP LCI
|
Appreciate
0
|
05-26-2020, 09:15 AM | #31 |
Driver
2695
Rep 2,715
Posts |
Thanks for the info on this. Was very quick and easy. Added the +reca to both CAS and NFRM and the edited the ABG coding as in the OP.
__________________
E90M 6MT Slicktop Single Humper in need of a diet
|
Appreciate
0
|
07-17-2020, 10:16 AM | #32 | |
Colonel
1478
Rep 2,672
Posts |
Quote:
__________________
2021 Alfa Romeo Stelvio Quadrifoglio | 2.9L | Trofeo White Tri-Coat | 8-spd
|
|
Appreciate
0
|
07-19-2020, 09:58 PM | #33 |
Save the manuals!
6053
Rep 6,758
Posts |
Are you using an OEM seat belt buckle connected to the yellow underseat plug?
The DCT needs to see that connection to get rid of that error. OC31 needs to be coded out on the passenger seat.
__________________
'16 M3 | '23 718 Spyder Past: E92 M3, F87 M2, E39 M5, etc |
Appreciate
1
SAMM3Y3089.50 |
07-21-2020, 12:46 PM | #34 |
Private First Class
60
Rep 100
Posts |
I recently installed a driver side recaro pole position and used protool to code out the only two error codes I got.
93AC - side airbag, left 93AE - active head restraint, left I'm using the OEM seat belt receptacle and its plugged into the yellow bulkhead connector. Once I cleared those two codes, I've been getting no lights and seat belt works fine. I'm no expert when it comes to vehicle coding, but this seemed like a really simple 1 min job. Confused as to why everyone else is having to code out multiple items. If anyone can educate me and let me know if I've done anything wrong here I'd appreciate it. |
Appreciate
0
|
07-21-2020, 12:52 PM | #35 | |
Driver
2695
Rep 2,715
Posts |
Quote:
__________________
E90M 6MT Slicktop Single Humper in need of a diet
|
|
Appreciate
0
|
07-21-2020, 01:04 PM | #37 |
Driver
2695
Rep 2,715
Posts |
Well those codes and airbag light should be coming back then. You have removed the airbags in the seats and their corresponding electronics, and haven't coded the remaining electronic modules of the vehicle to accept this.
__________________
E90M 6MT Slicktop Single Humper in need of a diet
|
Appreciate
0
|
07-21-2020, 01:10 PM | #38 |
Private First Class
60
Rep 100
Posts |
This is strange, since the codes/lights haven't returned. I'll check to see if the codes come up again but so far they haven't come back.
|
Appreciate
0
|
12-10-2020, 03:43 AM | #41 | |
Registered
0
Rep 1
Posts |
Quote:
Thanks in advance! |
|
Appreciate
0
|
06-01-2021, 10:07 AM | #43 |
First Lieutenant
559
Rep 361
Posts |
|
Appreciate
0
|
06-02-2021, 08:19 PM | #44 |
Private First Class
48
Rep 139
Posts |
Wow ProTool sounds like a fantastic easy-to-use alternative to NCSExpert; too bad it is only for Android phones. I haven't used NCSExpert in 10 years; not looking forward to learning it again.
__________________
2017 M3 DTC * 2013 M3 Manual
2017 330i (Winter beater) 1981 Camaro Z28 - 427 LS3 - 10.94 @126mph 2006 Corvette (streetable track car) 1986 535i "24 Hours of Lemons" also streetable |
Appreciate
0
|
Post Reply |
Bookmarks |
Thread Tools | Search this Thread |
|
|