|
|
12-03-2018, 10:22 PM | #200 | |
Sleepy Member, wishing I was on the road.
36
Rep 282
Posts |
Quote:
Also from what I read, most people don't have to reset or clear any codes. |
|
Appreciate
0
|
01-21-2020, 04:46 PM | #201 |
Registered
0
Rep 1
Posts |
I have a 2010 E90 M3 with 81k miles. Had code 27BB (Fuel system Lambda - bank2), 2B16 (throttle controller monitoring -bank 2). Car went in limp mode. I replaced the throttle actuator gears with the Odometer gears replacements on both bank 1 and 2 actuators. Re-installed. Note that one of the actuators (bank 1) had been replaced by previous owner at 40k, but bank 2 actuator was original (81k miles).
I put the older actuator (2009 date code) on bank 1 and the 2014 date code actuator on bank 2 (both with new odometer gears). Now I’m getting codes 2B21 (throttle pre-drive check bank 1) and car in limp mode permanently (doesn’t go away after clearing code). I also get code 5E19 (DSC ECU internal. Serial peripheral interphase (SPI) ID request not accepted. Coil outlet valve shorted front right…). Is this just a wiring/connector that isn’t making good contact, or what do you think? |
Appreciate
0
|
07-25-2020, 01:44 PM | #202 | |
Second Lieutenant
94
Rep 237
Posts |
Quote:
|
|
Appreciate
0
|
01-24-2022, 10:31 PM | #205 | ||
Brigadier General
4449
Rep 4,010
Posts |
Quote:
https://rebuild-usa.com |
||
Appreciate
1
DrFerry6748.00 |
10-04-2022, 10:58 AM | #206 |
Field Marshal
6748
Rep 1,829
Posts
Drives: '08 E92 M3
Join Date: Jul 2010
Location: Greenville, SC
|
What a great read this thread is. It's the epitome of what this forum once used to be. M Power Motorsports has now become Euro Parts Palace:
https://eupartspalace.com/product/bm...ttle-actuator/ . I recently had a good experience doing business with them. I needed rapid shipping because my car was down and in the shop. I bought two T.As from them, they were shipped within a few days, and they work flawlessly. This thread is definitely worth reading to learn more about the failure modes and preventive maintenance lubrication of T.As butterfly shaft bearings as well as gear set and circuit board component failures. .
__________________
'08 E92 M3 DCT Melbourne Red/Bamboo Beige Leather/EDC/SSP Spec-R DCT clutch discs/SSP Pro-Gold DCT Fluid/Quaife LSD/3:45 Final Drive by Diffs Online/BE Bearings & ARP Bolts/Vibra Technics Engine Mounts/M3 World HFC X-Pipe/LUX H8 180/BPM Sport DCT Tune/PFC Z-Rated Pads/ECS Brass Brake Caliper Bushings/Alex Shop Solid Sub-frame Bushings/Motul 600/Tint
|
Appreciate
3
|
10-24-2022, 08:11 AM | #207 |
New Member
0
Rep 7
Posts |
hi guys new at this car and want to dig into the TB's .
mosser or digikey does not have any of these number listed in this thread in stock , I found this one as an alternative . will this work or any of you have a new part number that is available? thanks guys TSM230N06CP ROG https://www.digikey.com/en/products/...CP-ROG/7360247 |
Appreciate
0
|
10-24-2022, 09:51 AM | #208 | |
Colonel
1709
Rep 2,229
Posts |
Quote:
__________________
Current '21 DG X5MC, '22 BG G82, '11 E90 M3
Recent Past '12 E92 M3 ZCP, '08 E93 M3, '18 F80 ZCP, '04 E46 M3 I think I have an M3 problem. |
|
Appreciate
1
DrFerry6748.00 |
02-09-2023, 04:16 PM | #209 |
Private First Class
91
Rep 111
Posts |
Yes. I'm wondering what others might be wondering. Is there a new proper source for the transistors? Thanks. Why pay $40 for 10 when you can have 50 of them for the same price. Allows me to do others. These cars are going to be around for a while.
|
Appreciate
1
DrFerry6748.00 |
02-09-2023, 04:48 PM | #210 | |
BimmerPost Supporting Vendor
8545
Rep 19,002
Posts
Drives: BMW
Join Date: Nov 2005
Location: Anaheim, CA
|
Quote:
https://octopart.com/search?q=HUFA76...cy=USD&specs=0
__________________
Tom G. | european auto source (eas)
email: tom@europeanautosource.com · web: https://europeanautosource.com· tel 866.669.0705 · ca: 714.369.8524 x22 GET DAILY UPDATES ON OUR BLOG · FACEBOOK · YOUTUBE · FLICKR · INSTAGRAM |
|
Post Reply |
Bookmarks |
Thread Tools | Search this Thread |
|
|