Looking for: Aux water pump install

[phichi1106]

I been searching but maybe I'm not searching for the right things. I'm looking for a DIY for the auxiliary water pump. I threw a code this weekend and it led me to:
https://www.m3post.com/forums/showthread.php?t=1415033

Thank you in advance! I was looking to work on it before the turkey is ready!

[MaximusB]

Subscribed.

[schlichtm3]

I have changed the aux pump last year,
because of the same error you have: 00A6D1

Partnumber is: 64118369806

You will finde the Pump near the Firewall of the Driversside (LHD).
After you have removed the Airfilterbox you can see the pump.
Remove the connector on top and the two waterhorses (i used two clamps, so no need to fill up coolingwater). Al in all very easy and max. 1 hour of work.

[Helmsman]

Originally Posted by phichi1106

I been searching but maybe I'm not searching for the right things. I'm looking for a DIY for the auxiliary water pump. I threw a code this weekend and it led me to:
https://www.m3post.com/forums/showthread.php?t=1415033

Thank you in advance! I was looking to work on it before the turkey is ready!

Had the A6D1 code coming and going but now seems not possible to clear anylonger. Noticed also you have an 2011. As the "Rest" button apparently was taken away from 2010 (I had it on previous bimmers), when is this pump used?
The Rest button enabled the pump with ignition off, but in our case one have to have it on anyways correct?

The pump is a good $300 over here so starting to wonder whether I actually want to replace it as I don't see the point with it... You?

[ItsGary]

Originally Posted by Helmsman

Had the A6D1 code coming and going but now seems not possible to clear anylonger. Noticed also you have an 2011. As the "Rest" button apparently was taken away from 2010 (I had it on previous bimmers), when is this pump used?
The Rest button enabled the pump with ignition off, but in our case one have to have it on anyways correct?

The pump is a good $300 over here so starting to wonder whether I actually want to replace it as I don't see the point with it... You?

Could be used for cooling also as our cars use a mechanical water pump, but the Aux Pump is electric which can be useful to cool down when the car is off.

[Helmsman]

Originally Posted by ItsGary

Could be used for cooling also as our cars use a mechanical water pump, but the Aux Pump is electric which can be useful to cool down when the car is off.

Yes, maybe thats the case when the fan is still on after engine turned off, fan wouldn't have much to make noise over if the coolant wasn't moving, thanks.

Another "use case" - even without the Rest function - could be during stop/start, maybe. Coded this our long ago so in my case do diff.

Thanks again though. My fan rarely stays on after turn off (Nordic climat, rarely over 25C Summer...), but will definitely keep this in mind as possible reason to get a new pump.

Cheers,
Nik

[Helmsman]

Another funny input on this strange pump of mine; had a chat with the dealer thinking of order one still. They checked my vin and said my car should not have one installed. But it has... Ah well, maybe I'll replace it one of these days.

[crypticc]

Originally Posted by Helmsman

Another funny input on this strange pump of mine; had a chat with the dealer thinking of order one still. They checked my vin and said my car should not have one installed. But it has... Ah well, maybe I'll replace it one of these days.

Hi

Thread bump

A long time ago in my 2012 (Nov '11 build) E92 M3 I used Carly to add Rest button ventilation. At about this time this error code appeared and I've ignored since.
Interestingly I've just gone back in to remove the code but Carly reports the option as not renamed, i presume at some time at dealer they did a full flash and removed the rest coding.

Does anyone know which properties in INPA relate to REST option so I can check the option is fully removed?

Also does anyone know if it's possible to verify if the pump from this thread present without dismantling the air box? Where am I looking for it exactly? (Any engine bay photos maybe)?

Thanks
Chris

[Helmsman]

Originally Posted by crypticc

Hi

Thread bump

A long time ago in my 2012 (Nov '11 build) E92 M3 I used Carly to add Rest button ventilation. At about this time this error code appeared and I've ignored since.
Interestingly I've just gone back in to remove the code but Carly reports the option as not renamed, i presume at some time at dealer they did a full flash and removed the rest coding.

Does anyone know which properties in INPA relate to REST option so I can check the option is fully removed?

Also does anyone know if it's possible to verify if the pump from this thread present without dismantling the air box? Where am I looking for it exactly? (Any engine bay photos maybe)?

Thanks
Chris

Happy New Year Chris!

I'd suspect its possible to take a peek beside the filterbox. If not its obviously easy to remove it.
The aux pump is just below: