|
|
|
KEEP M3POST ALIVE BY DOING YOUR TIRERACK SHOPPING FROM THIS BANNER LINK! |
Post Reply |
|
Thread Tools | Search this Thread |
06-22-2017, 09:30 AM | #1 |
Enlisted Member
7
Rep 43
Posts |
Turner BMW 10mm Wheel Spacers With Integrated Hub Extender
Hi, does anyone know or tried to see if these will fit e9X wheel hubs without issue?
https://www.turnermotorsport.com/p-3...87-m2/?pdk=AQE Reason I want to try these is I have read a few posts that say the 10mm Macht Shnell spacers can cause some vibrations due to the way the spacer sits on the hub. The Turner one also hides the hub rust from not having center caps on my wheels. Thanks in advanced for you input. Jay |
06-22-2017, 09:59 AM | #2 |
///M Powered for Life
11736
Rep 10,457
Posts |
I don't know why it says F8X and F87 only...
|
Appreciate
0
|
06-24-2017, 05:22 AM | #3 |
Lieutenant
178
Rep 513
Posts |
Maybe the "lip" on the Hub is slightly different between the E9X and F8X. I wouldn't be surprised if there's a slight difference.
E9X "lip" might be a bit larger than the F8X, which allows them to make that cap to go over the lip maybe. |
Appreciate
0
|
06-25-2017, 09:08 AM | #4 |
Major General
2760
Rep 6,735
Posts
Drives: 'E46 M3 Race Car, '23 X7
Join Date: Jan 2009
Location: Wisconsin - Instagram - @slicer_m
|
The F8x version is definitely different as the hubs differ - do not get those. I have Turner's standard version for the e9x (and other platforms) and it works fine, no problems. I currently have a 10mm spacer on my front hubs. I do recall that certain wheels with less of a hub chamfer can interfere. Test on wheel prior to install, torque lugs with little or no weight on the wheel, and inspect to ensure everything is sitting flush after install.
__________________
'23 X7
'04 M3 - Fall Line Motorsports Built Race Car - S65 swap, Dry Sump, Bosch Stand-Alone ECU, Drenth Sequential Trans, MCS 3-Way, Flossmann Wide Body, Brembo Motorsports Brakes, Drexler LSD, BBS E88 Etc. INSTAGRAM - @Slicer_M |
Appreciate
0
|
Post Reply |
Bookmarks |
Thread Tools | Search this Thread |
|
|