Powerflex Tuneable Hybrid Urethane Engine Mounts

Redd · 09-09-2018, 07:06 PM

Do it!

dozaiya · 09-10-2018, 10:24 AM

i have decided on these mounts and will probably do them in a month or two, stay tuned

Redd · 10-23-2019, 08:47 AM

Any update on this mod?

CurbBender'90 · 10-31-2019, 05:45 PM

So bought and installed these during a rod bearing job and I was hesitant because of the price even though I knew it meant I would never have to replace them again...Once I got the car back I couldn't tell the difference which was perfect! I did not use the insert pins to stiffen them further.

NQRDDS · 12-30-2019, 08:55 PM

Quote:

Originally Posted by CurbBender'90

So bought and installed these during a rod bearing job and I was hesitant because of the price even though I knew it meant I would never have to replace them again...Once I got the car back I couldn't tell the difference which was perfect! I did not use the insert pins to stiffen them further.

I'm doing my rod bearings soon and have been curious about these too. Wondering if they really last much longer than oem mounts. How have they been since the install?

daarts · 12-31-2019, 12:45 AM

Subb’d for results

optionfans · 01-21-2020, 02:26 AM

Quote:

Originally Posted by CurbBender'90

So bought and installed these during a rod bearing job and I was hesitant because of the price even though I knew it meant I would never have to replace them again...Once I got the car back I couldn't tell the difference which was perfect! I did not use the insert pins to stiffen them further.

I am seriously considering PowerFlex engine mount. Do you feel any vibration during idle?

NQRDDS · 01-21-2020, 09:36 AM

I ended up buying these to install when I do my rod bearings. Will update later next month once they're in

CurbBender'90 · 01-21-2020, 09:16 PM

Quote:

Originally Posted by NQRDDS

I'm doing my rod bearings soon and have been curious about these too. Wondering if they really last much longer than oem mounts. How have they been since the install?

They have been very good I highly recommend them! As far as extra cabin vibrations I would say very very minimal on the standard side.[pins out]. I had to sit in my car at idle and just stare at the gear shifter and listen for pulsing or build up and I found none. I convinced myself the car was always the same since I got it. I do not think you would ever need to put the pins in on a street car, vibrations might become noticable then....oh yea and while 400 is steep we can consider these truly lifetime.

NQRDDS · 01-21-2020, 09:21 PM

Quote:

Originally Posted by CurbBender'90

They have been very good I highly recommend them! As far as extra cabin vibrations I would say very very minimal on the standard side.[pins out]. I had to sit in my car at idle and just stare at the gear shifter and listen for pulsing or build up and I found none. I convinced myself the car was always the same since I got it. I do not think you would ever need to put the pins in on a street car, vibrations might become noticable then....oh yea and while 400 is steep we can consider these truly lifetime.

Great! Thanks for the positive review

I'm really looking forward to having these in. I wasn't planning on changing my mounts every 30-50k miles on a street car lol.

Redd · 01-27-2021, 04:37 PM

Any new feedback or long-term review on these mounts? About to pull the trigger soon cos my Vibra-technics mounts just died on me after 9k kms. Same failure mode as Mobbin experienced.

NQRDDS · 01-28-2021, 08:33 PM

Quote:

Originally Posted by Redd

Any new feedback or long-term review on these mounts? About to pull the trigger soon cos my Vibra-technics mounts just died on me after 9k kms. Same failure mode as Mobbin experienced.

Have had them in my car for 15k miles already and still love them since day 1. I don’t have any of the inserts placed, and is comfortable for daily driving. There is slightly more vibration at idle but is tolerable. Other than that, feels great while driving!

Redd · 01-28-2021, 09:01 PM

Quote:

Originally Posted by NQRDDS

Have had them in my car for 15k miles already and still love them since day 1. I don’t have any of the inserts placed, and is comfortable for daily driving. There is slightly more vibration at idle but is tolerable. Other than that, feels great while driving!

Thanks! Powerflex mounts ordered! Do you remember what spec you torqued them to?

NQRDDS · 01-30-2021, 01:23 AM

Quote:

Originally Posted by Redd

Thanks! Powerflex mounts ordered! Do you remember what spec you torqued them to?

Nice! Pretty sure they were tightened to about 41 ft lbs (56 Nm). I don’t recall the mounts came with instructions to tighten to a different spec other than the oem mounts. Hope you enjoy them!

irokwrx · 02-03-2022, 06:16 PM

Quote:

Originally Posted by Redd

Thanks! Powerflex mounts ordered! Do you remember what spec you torqued them to?

Redd, can you please give some feedback on these, I am about to pull the trigger and wanted to get some more feedback. Did you install any of the pins?

Redd · 02-03-2022, 06:43 PM

Quote:

Originally Posted by irokwrx

Redd, can you please give some feedback on these, I am about to pull the trigger and wanted to get some more feedback. Did you install any of the pins?

I installed them without any pins since the car is a daily driver. Without pins they are about the same stiffness as new Vibra-technics mounts. There will be a wee bit more vibration at idle, but you gotta be looking out for it to notice it. I don't really notice it much as my car is on stiffer bushes and I have a loud exhaust so the car already makes a lot of noise. When driving there is no NVH.

I've only had them in for about 6k kms so can't give a long term review beyond that. I did open up the PF mounts to inspect them and they are easily serviceable. I also confirmed with PF that they will provide replacement parts and come with a lifetime warranty.

irokwrx · 02-03-2022, 08:14 PM

Quote:

Originally Posted by Redd

I installed them without any pins since the car is a daily driver. Without pins they are about the same stiffness as new Vibra-technics mounts. There will be a wee bit more vibration at idle, but you gotta be looking out for it to notice it. I don't really notice it much as my car is on stiffer bushes and I have a loud exhaust so the car already makes a lot of noise. When driving there is no NVH.

I've only had them in for about 6k kms so can't give a long term review beyond that. I did open up the PF mounts to inspect them and they are easily serviceable. I also confirmed with PF that they will provide replacement parts and come with a lifetime warranty.

Thanks, I just ordered a set.

aus · 02-07-2022, 12:02 AM

Where are you guys getting your mounts?
.

Redd · 02-07-2022, 12:52 AM

Quote:

Originally Posted by aus

Where are you guys getting your mounts?
.

Ordered mine from UK cos I'm in Asia.

Redd · 05-24-2024, 07:04 PM

Long term review on the Powerflex engine mounts. Mine have been in the car 3+ yrs, 22k kms, zero issues.

M3SQRD · 05-24-2024, 08:05 PM

Quote:

Originally Posted by Redd

Long term review on the Powerflex engine mounts. Mine have been in the car 3+ yrs, 22k kms, zero issues.

Mine have been on for 5+ years with zero issues. They raise the engine by about a 0.10” compared to stock. Karbonius ///M V8 version clears the hood without contact.

09-09-2018, 07:06 PM	#23
Redd Brigadier General 4094 Rep 4,336 Posts Drives: 2010 BMW E92 M3 Dakar Edition Join Date: Jul 2015 Location: Malaysia iTrader: (0)	Do it!
	Appreciate 0 Quote

09-10-2018, 10:24 AM	#24
dozaiya Captain 239 Rep 957 Posts Drives: 2011 MW E92 M3 Join Date: Nov 2012 Location: Shanghai iTrader: (1)	i have decided on these mounts and will probably do them in a month or two, stay tuned
	Appreciate 1 ///Mobbin1478.00 Quote

10-23-2019, 08:47 AM	#25
Redd Brigadier General 4094 Rep 4,336 Posts Drives: 2010 BMW E92 M3 Dakar Edition Join Date: Jul 2015 Location: Malaysia iTrader: (0)	Any update on this mod?
	Appreciate 0 Quote

10-31-2019, 05:45 PM	#26
CurbBender'90 S 75 Rep 439 Posts Drives: 2010 S65 Join Date: Sep 2011 Location: West.Bloom iTrader: (1)	Update So bought and installed these during a rod bearing job and I was hesitant because of the price even though I knew it meant I would never have to replace them again...Once I got the car back I couldn't tell the difference which was perfect! I did not use the insert pins to stiffen them further. __________________ DCK
	Appreciate 2 dozaiya239.00 tlrid3r518.00 Quote

12-31-2019, 12:45 AM	#28
daarts Private 39 Rep 93 Posts Drives: E92 M3 Join Date: Apr 2018 Location: SoCal iTrader: (1)	Subb’d for results __________________ 2012 E92 M3 ZCP Jerez Black/Bamboo 2020 F90 M5 Comp British Racing Green/Tartufo
	Appreciate 0 Quote

01-21-2020, 09:36 AM	#30
NQRDDS Private First Class 54 Rep 121 Posts Drives: E90 M3 Join Date: Oct 2019 Location: Bay Area, CA iTrader: (0)	I ended up buying these to install when I do my rod bearings. Will update later next month once they're in
	Appreciate 0 Quote

01-27-2021, 04:37 PM	#33
Redd Brigadier General 4094 Rep 4,336 Posts Drives: 2010 BMW E92 M3 Dakar Edition Join Date: Jul 2015 Location: Malaysia iTrader: (0)	Any new feedback or long-term review on these mounts? About to pull the trigger soon cos my Vibra-technics mounts just died on me after 9k kms. Same failure mode as Mobbin experienced.
	Appreciate 0 Quote

02-07-2022, 12:02 AM	#40
aus Major General 903 Rep 9,034 Posts Drives: Odysse Join Date: Jul 2005 Location: Seal Beach, CA iTrader: (10)	Where are you guys getting your mounts? . __________________ Let me get this straight... You are swapping out parts designed by some of the top engineers in the world because some guys sponsored by a company told you it's "better??" But when you ask the same guy about tracking, "oh no, I have a kid now" or "I just detailed my car." or "i just got new tires."
	Appreciate 0 Quote

05-24-2024, 07:04 PM	#42
Redd Brigadier General 4094 Rep 4,336 Posts Drives: 2010 BMW E92 M3 Dakar Edition Join Date: Jul 2015 Location: Malaysia iTrader: (0)	Long term review on the Powerflex engine mounts. Mine have been in the car 3+ yrs, 22k kms, zero issues.
	Appreciate 0 Quote