Quote:
Originally Posted by ShaunC
Mine's just started giving me this warning too so I've been looking into this. I managed to unclip the wiring harness by the small black tab on the harness itself. You should then see a tab on the black bulb holder that you push up according to the user manual to remove the bulb holder. I'm going to give this a go tomorrow but it doesn't sound too difficult. The instructions for getting to the boot/trunk lid lights are also in the user manual.
However, if all your bulbs are fine, there is a known fault with the older bulb holders - BMW TSB 63 02 08 - that the newer bulb holder (part # 63 217 174 407) fixes.
|
ShaunC thank you for your response. It seems each side has two bulbs. On my drivers side one bulb is out. So it seems as if the brake light is working, but after looking closer I can see one bulb is out. Now Im just trying to find the best place to buy the bulb lol