[beppeM3+123d]

Hi guy coming from f coding the reset procedure is:
1) Launch C:\EDIABAS\Bin\TOOL32.EXE
2) Hit F3
3) Load C:\EDIABAS\Ecu\F01.PRG
4) In the "Select Job: F01" window, select FS_LOESCHEN_FUNKTIONAL
5) Hit F5
6) "Results" window should show "JOB_STATUS = OKAY"

With mine m3 what is the file that i have to load frome ecu folder?

All the rest is ok?

Thanks for help!