Great thread. With some very interesting positive rubbing results. I would consider mine also quite surprising.
Car: 2011.5 E90
Wheels w/ Offsets: OEM 220
Spacers: MS (F) 15mm; (R) 12mm
Tires / Miles: Pirelli P Zero OEM sizes 265/35/19 245/35/19, brand new
Suspension: Dinan Stage 1
EDC Setting: all
Alignment: Dinan stage 1 specs
Fender Modifications: (F) None (R) None
Rubbing?: (F) No. (R) Yes, both sides, outside corner of tires rubbing the plastic nub on the wheel well liner mostly on bigger bumps at speeds over 40mph. Also over larger rounded speed bumps (not the small pointy ones). I have smoothed down the plastic significantly via my rubbing, and have also used a Dremel to smooth it further. I'm still rubbing, albeit not as much as immediately after the simultaneous suspension and spacer install.
__________________
2011.5 E90 Dinan M3, SS II, M-DCT, EDC, M Drive. 20" MORR VS8.2 wheels
Performance Mods: Dinan St.1 suspension, exhaust, intake; TTPs; BPM St.II, DCT, servo tunes
Cosmetic Mods: OEM CF splitters, mirrors, center console, spoiler; Arkym CF diffuser; LUX; tint
|