View Single Post
      07-27-2014, 10:18 PM   #9
Major General
bigjae1976's Avatar

Drives: 11 E90 M3 Individual
Join Date: Mar 2006
Location: Wichita, KS

iTrader: (14)

Garage List
2004 BMW M3  [4.50]
2011 BMW E90 M3  [5.00]
2013 BMW 328i  [5.00]
Actually, on stock camber you want higher pressures which will help reduce how much the tire rolls over onto the sidewall. Then its a double edged sword because your pressures will be higher and the front end will be very twitchy and skatey. Then you'll understeer constantly.

As I said on need camber and roll stiffness on the front axle or less roll stiffness on the rear axle. The cheapest thing you can do is disconnect the rear sway bar...not sure if that will help a whole lot. I would buy front camber plates which will pay for itself over a couple of events as your tires will last a lot longer.

E46s like a relatively high front spring rates, -3.5 camber or more, and a big front sway bar.

Originally Posted by mid-corner fun View Post
What they said. And by the way, "Weed and Feed" is your friend, your lawn looks almost as bad as your tires
2015 F34 328iX GT Glacier Silver
2011 E90 M3 Monte Carlo Blue
2004 E46 M3 Imola Red