|
I used this to remove the old bush. Worked fine. I dry iced bw solids in an attempt to try and install them with the same tool. It didn't work. Ended up stripping the threads of the bolt. I upgraded the bolt and nut, still didn't work. I ended up dropping the subframe and putting it in a h frame 20 ton press and it was done in minutes. I wouldn't recommend attempting to install solids with this tool, the eBay description was accurate so I can't be mad…. In the end it cost me time, effort and $120 for tool, hardware and dry ice. I was trying to be slick and do it without removing the subframe.
|