Quote:
Originally Posted by italyix
http://www.ctbrakes.com/calipers.asp?Make=Alcon_Calipers
|
hey italyix
I already checked this page a few weeks ago. already.
Here is email between Carbotech and me
l'll be appreciate if you give me some advice about available Carbotech pads for superkit.
We will need more info from you on which kit you have before we can give you part numbers and prices.
Thanks-
Mike Jr.
I attached BBK drawing files that I have.
Do you have any drawings of the pads that are used in these calipers?
No.
This drwaings were downloaded from Alconusa.com.
M3post member using Alcon superkit with Carbotech pads recommended your pads instead of expensive Pagid pads.
Yes, I found the same one's using your car info.
It appears that they pads could be 1 of a couple different shapes from the pictures, but there is no guarantee that the pad pictures with the kits are the actual pads used in the kit.
It looks like the 4 piston is the CTMONO-4 shape but we cannot confirm the dimensions and the 6 piston looks to be the CTP7797, but again, we cannot confirm the dimensions.
Here is what we have on each of them:
CTMONO-4- 131mm x 62.5mm x 16mm (thick)
CTP7797- 163mm x 69.5mm x 18mm (thick)
Let me know what you can find out and we will go from there.
Thanks again!
So, I wanna Know exact part No. before order