Big thank you for this write up. I just did this for my 180k maintenance along with some other items. A couple of notes:
- OFH are T30 and T45 bolts. T30 are M6 bolts (6): 10Nm; T45 are M8 bolts (3): 18Nm
- oil line nuts to OFH (2): 18Nm
- water pump bolts (4): 10Nm
- thermostat housing bolts (3): 10Nm
- water pump pulley bolts (4): 10Nm (not-verified)
- ps pulley bolts (3): 19 Nm
- ps pump to bracket (3): 19 Nm
- deflection pulley (the one i front of the water pump pulley): 34 Nm
No need to touch the PS mounting bracket, nor the AC mounting bracket. I was able to just rotate the PS pump forward and down and reach the OFH bolts.
Again, major thank you to OP for this. It made the job very straight forward!
