[Chromey]

Having the exact same issue , so glad I found this post. I’m mechanical challenge so I’ll have to call in a friend but I hope this will solve my issue.. I can get it to go if I lower then raise the top slightly and re drop it , some times it takes but most time it takes a few tries. The other fix is to drive then hit a bump and that seems to click it into place or at least let the sensor think so.

Anyhow my question is it looks like the plastic cover over the rol bars etc cover one of the screws. In your pictures you don’t seem to have a cover over your metal roll bars. Did you just have it off prior to pictures and if so was that a pain to remove, what is also the deal with the marks to line up the torq screws. Is that a must to do? Thanks for any help.

Nevermind saw that I’m the first pics you have it on.. just have to remove I see