Quote:
Originally Posted by Tony1973
Jsl the brakes look great. What are you running in the rear! Are the oem f80 rear caliper, if yes were did you get the bracket to mount them
Thanks
|
They are OEM F8x rear calipers with F8x rear rotors (370mm)
No brackets needed, just use two washers on each bolt to get it centered.
The washer size is M12, you will need 8 washers. Make sure you use washers that won't rust!
See picture. Credit to Nostra, I downloaded the picture from his post.
You're probably wondering what about the F8x front calipers? Way more involved than just 8 washers. You need new bolts and the front spindle from the F8x chassis. Not a easy bolt-on.