Thanks Tom. Am considering to go 19” instead.
Would I need spacers based on specs below on the E92 M3 with ST XTA coilovers with the VS-5RS on 265/30/19 and 285/30/19
Front: 19x9.5" ET22
Rear: 19x10.5" ET22 or ET25
Quote:
Originally Posted by ApexRaceParts
There are multiple Brembo GT kits available for the E9X M3. Our 18x9.5 ET22 VS-5RS clears the 1N1.9003A kit + the other rotor variants with no spacers for example. This is the most common kit you'll see run on these cars.
These wheels will not clear the 1T1.9010A 6 piston Brembo kit which is an updated caliper.
Another thing to note with these kits is that the paired rear brakes have a large mounting bolt that causes our 18" rear wheels to not clear the bolt. This applies to the following rear kits: "2P1.9013A, 2P1.9060A" REAR GT/GT-S/GT-R 4 piston 380x28mm
Hope that helps,
-Tom
|