View Single Post
      07-24-2013, 06:40 PM   #22
W Cole

Drives: 2009 M3
Join Date: Dec 2010
Location: Newport Coast, CA

iTrader: (5)

Originally Posted by tom @ eas View Post
Wiring should be the following:

PIN2 from Module >> PIN15 on EDC connector
PIN10 from Module >> PIN14 on EDC connector
PIN3 from Module >> Red wire removed from EDC connector (BMW harness)
PIN11 from Module >> Blue/Red Wire removed from EDC connector (BMW harness)

Power/Ground can be obtained from the white connector:

PIN1 = +12V Power
PIN6 = Ground

Hope this helps.
Sorry to revive an old thread but the top two connections above are the opposite of what the euro tuner article says:

PIN 2 >> PIN 14
PIN 10 >> PIN 15

Which is correct?