Quote:
Originally Posted by DreamTime
Can i just code out EDC? Awesome! I originally thought that would be an option, but I was told somewhere along the line that it wasn't easily done. If that is an option though, it is definitely way better than a box sitting in my car tricking the system. I'll need to find out more about this... thanks!
|
Indeed! That's what I plan to do. If a laptop + NCSexpert is not part of your toolset, you can either learn it or get someone that does coding to help you.
Quote:
## Code out edc
1) Disconnect EDC module. It's located on the passenger side rear quarter panel, accessible through the trunk. It's the module with 2 connectors (white and blue). Can't miss it.
2) Remove option $233 from Vehicle Order in CAS using FA_write; then change ECU and FA_write the NFRM.
3) In KOMBI set EDCK_ALIVE_ZAEHLER to nicht_aktiv and EDCK_ID_MONITOR to nicht_aktiv.
4) If you have the first gen idrive (08) in CAPPL set EDC to nicht_aktiv. / if you have the later idrive in CIC set EDC_CIC to nicht_aktiv
|
http://www.m3post.com/forums/showthread.php?t=1141087
Post by Kevin (Kaiv)