|
Installed Megan this past weekend. Awesome exhaust for the price.
My 2 cents. If you want to install Megan in your car,
1) go to Home depot and buy 4X M8 nuts. You need them to mount the side of the muffler to the car and use OEM hardware.
2) The passenger side was higher. We used about 3mm of spacers on that side and they are even.
3) the clamps hardware should be replace, one of my screw snapped while we were adjusting the tip's position. Replaced with oem hardware.
4) let it settle before final adjustments, it shifts as the exhaust warms up and cools, my driver side moved about 1/4" after a spirited drive after install. Exhaust still moves a bit depending on how warm it is
|