Quote:
Originally Posted by Adrian g.
Ideal offset for an 11" wheel in the rear, assuming you are going for max width, is 32-34mm,
If you are trying to fit a 295/35/18 A052 on a 11" et25, it will not clear. slicer tried with an 11" et28 wheel and it didn't fit, so even less chance an et25 will clear the bodywork.
If you are trying to fit a 295/35/18 A052 on a 10.5" et27, it should clear, but since these tires run very wide, it will be quite pinched on a 10.5" wheel.
|
Thanks! So sounds like going forward an 18x11 et44 off-the shelf wheel with a 12mm spacer would be a better bet if I want to continue to run the setup?
I'm looking at purchasing another pair of 18x11 wheels in either et25 or et44 so I guess this helps my decision some and et44 is looking like the way to go and just playing with spacers from there.