Quote:
Originally Posted by Kelse92
Bringing this thread back up from the dead. 
I ended up fitting 275/40/18 on 18x10.5 et27 and 18x11 et25 wheels in the rear. Didn't work up front like slicer predicted but I was hard headed and had to try lol If anyone wants pics I have some.
Looking back in here though results varied on the 295/35 setup in the rear so checking in to see what the verdict might be on either of the above wheel specs I have? I got ahold of three sets of barely-used 265/295 staggered that I got for a great deal so I'd like to try to fit them on. From the sounds of it the et25 or so should work?
TIA |
Ideal offset for an 11" wheel in the rear, assuming you are going for max width, is 32-34mm,
If you are trying to fit a 295/
35/18 A052 on a 11" et25, it will not clear.
slicer tried with an 11" et28 wheel and it didn't fit, so even less chance an et25 will clear the bodywork.
If you are trying to fit a 295/
35/18 A052 on a 10.5" et27, it should clear, but since these tires run very wide, it will be quite pinched on a 10.5" wheel.