View Single Post
      09-08-2012, 04:30 AM   #2
So Kewl Guy
C|3R1C's Avatar

Drives: 2010 E93 M3 DCT
Join Date: Sep 2011
Location: Los Angeles

iTrader: (3)

Originally Posted by mr. 535i View Post
hey guys, forgive me for being such a newb. i ordered a set of aftermarket rims, just got them in the other day. when i took them out of the box to take a look i noticed they had two holes drilled in each barrel. i call the manufacturer to ask about this. i was told one is for TPMS and the other for the valve stem.. but i looked at the toms and to me doesn't the valve stem mount right to the sensor? im am quite lost. do i have to mount to valve stems? any help on the subject would be greatly appreciated.
Do you have any pics? Sounds like they made a mistake from what you're saying. You wheels should only have one hole since the TPMS is mounted with the stem (BMW OEM that is).
2010 E93 M3 / MS Catless X-Pipe / AA Catback / Vorsteiner Vented Hood and Bootlid E93 Trunk / ADV1 7.1 Wheels GB / LS3 LED Lights / Harrop Supercharger