Quote:
|
Originally Posted by alex1988
Quote:
Originally Posted by d0o0fy
Alright, I have tried several times now and still no luck, so I'm at a loss. I have tried resetting without changing anything on the sensors; obviously didn't work. Tried resetting while front right was jumped; didn't worked. Tried putting back the sensors in the stock pads (they are usually tied to the control arms) and reset; didn't work either.
The sensors (fronts and back) look good and don't seem damaged or anything.
I learned my lessons and will reset before the counter runs down next time, but it got down REALLY fast!
Anybody have any idea?
|
you sure you jumped the right wires? "disconnect the sensor and jump the two wires on the harness connector that the sensor connects to"...
You need to take out the two wires inside the harness connector and jump them. |
Yup that's what I did. Disconnected the white connector from inside the little black box in the front wheel well and shorted it with a jumper wire.