[regular guy]

2743 - P0155

2743 - P0155
Information saved in	DME
Fault code	2743 - P0155
Fault text	Oxygen sensor heater resistance diagnosis before cat. converter, bank 2
Fault description	O2 Sensor Heater Circuit (Bank 2 Sensor 1)
Condition for fault identification	Test condition: The upper or lower threshold of the resistance values has been violated, above/below 6.0 ohms (K_LSHVK_DIAG_RU) 14.5 ohms (K_LSHVK_DIAG_RO)
	Terminal condition: Engine running
	Voltage condition: Battery voltage > 9V (k_ed_ubmin)
Condition for fault memory entry	min. K_LSHVK_DIAG_ANZ_MESS (100) valid calculations of heater resistance - roughly.1.5 sec.
Action in service	1. DME software release must be more recent than 07-06-510, fix incorporated since 07-09-521
	2. Check plug, wiring harness on pre-cat oxygen sensor LSVK B2,
	3. If OK, replace oxygen sensor
Fault effect and breakdown warning	MIL lamp on after engine runs 2x /Small influence on drivability
Driver information	Warning light: MIL
Service instruction	None