Quote:
Originally Posted by Kong Sheng Han
Installing studs with Loctite 271 (red) as we speak. Rip.
Quote:
Originally Posted by scotty_miller
Removing a stud at the track wouldn't be all that bad... just time consuming. Might miss a session. If it sheared off at the hub, remove the rotor to expose more of the hub/stud, drill out part of the stud and pound a male torx bit in(t30-t35), heat the hub with a propane torch and back it out with a ratchet. All you would need to add to the tool bag is a drill, bit set, sacrificial torx bit, hammer, and oh a torch 
Just a word of advice so no ones track weekend/day gets ruined |
Thanks. This is what I'll do. |
Let me know how it works out. PM me if you need any help