Quote:
Originally Posted by W///
It's really not a bad DIY at all. If you know how to take the intake plenum off, you are more than half way there.
Don't let these guys that go to dealerships for warranty and come back with a $2k bill throw you off. The part is $800 and this can be done in under half a day if you follow my instructions.
|
I replaced the HALL SENSOR bank 1 first thinking that it might be the problem cause it is the sending sensor to the actuator but the code came back.
Swapped bank 1 & 2 and fault followed so i had my boy ordered the actuator. $800 i got it for,much better than $1050 + tax !
Thanks for the help and great write up Sir !