01-26-2020, 08:05 PM
|
#30
|
Colonel
Drives: 2013 M3
Join Date: May 2015
Location: Albany, NY
|
Quote:
Originally Posted by ThunderMoose
Quote:
Originally Posted by rhyary
Quote:
Originally Posted by ThunderMoose
Quote:
Originally Posted by rhyary
Quote:
Originally Posted by admranger
Quote:
Originally Posted by rhyary
Thanks. will look for the 2"
|
Works great and is easy to take off when it's time for new tires.
Be gentle as you install it or it'll rip over the weight corners.
|
Thanks for your suggestions. I did all four wheels and right away I realized it is more complicated than you would think.
Everything I do always end up being complicated.
So first, I did not want to put the tape on the full length of the weight. I only wanted to tape the end.
So when you tape it, the weight edge drops in a 90 degree angle. So do I tape it creating a slop with an air pocket? or do I try to make the tape follow the 90 degree then extend to the wheel.
I tried it both ways but neither looks conclusively better that the other way.
Open to suggestions
|
I just tape the whole way
|
That does not tell me what to do with the edges.
|
I try to remove any pockets so that tape follows the shape of the weights. Main thing is that tape has good and smooth contact area on the rim.
|
got it.
|
|
|