Macht Schnell - Competition Wheel Spacer kits for BMW - IN STOCK/FREE INSTALLATION
Machined from 6061-T6 aerospace aluminum, these adapters are strong as well as lightweight to limit unsprung/reciprocating weight for maximum performance on or off the track. Spacer edges are also chamfered to allow for easy installation/removal if needed. After machining, the spacers are then anodized for additional strength, anti-corrosion & wear resistance.
Available Sizes: 3mm, 5mm, 10mm, 12mm, 15mm, 18mm, 20mm
Macht Schnell spacer reference thread with photos and spec details:
http://f80.bimmerpost.com/forums/sho....php?t=1000804
Macht Schnell DIY on how to properly install spacers:
http://www.m3post.com/forums/showthread.php?t=272915
A wider track stance increases lateral stability as well as giving your BMW a much more aggressive appearance after installation. Spacers also are used to correct wheel gap normally seen on otherwise stock suspension setups, pushing the wheels outward - filling the fenders.
Included with our Competition Wheel Spacer Kits are a full set of extended lug bolts in black OEM finish. All wheel fasteners are hardened and tempered to strength class 10.9 or 10 according to DIN/ISO standard 898 and meet the statutory requirements of all countries - including the US.
Competition Wheel Spacer kit Features:
- Machined from 6061-T6 aerospace aluminum
- Chamfered edges allows installation & removal quick and easy
- Black anodized finish for additional strength and corrosion/wear resistance
- Improve handling by reducing body roll with a wider wheel base
- Included black extended-length corrosion-resistant wheel fasteners
Coding & Personalization - $95 "All you can eat" special
Whether its scanning a simple Check Engine Lamp, Personalization or are looking for full retrofit coding - we are your one-stop facility for your programming needs.
Why should you choose eas as your SoCal coding facility?
- Over 11+ years experience in module coding
- Fully Equipped with Autologic Diagnostic Scanner/Programmer
- Autologic Optical Interface (OPS Diagnostic Head)
- Proper Voltage Stabilization maintained with Fronius ACCTIVA Professional Flash (70 Amp)
- Non-biased programming facility, with no fear of warranty rejection.
Autologic Diagnostic Scanner
The Autologic diagnostic tool for BMW vehicles is without doubt the most comprehensive tool to be made available to independent BMW specialists. Autologic BMW is unique in offering full dealer-level fault code read and re-set, full component activation, electronic control unit procedures, clearing and setting of adaptation values, full coverage of (ECU) control units coding, full programming capability including engine control modules and transmission control modules, adjustment of engine idle, real-time reading of all dynamic data, procedure for engine and immobilizer alignment, procedure for trial substitution of control units and procedure for the fitting of BMW accessories.
Autologic Optical Interface
The Autologic Optical Interface has been designed to program the CCC-A control units on BMW. Connecting directly to the fibre optic MOST bus, the Autologic Optical Interface is able to communicate with CCC-A, CCC-BO, CCC-ASK, CCC-ANT, ULF TCU and MASK ECUs. The Autologic Optical Interface significantly reduces the time to program these control units and further increases the reliability and recoverability of flash updating these control units.
Power Stabilization
Intelligent battery charging systems are
very important given the technology of BMWs. We use the Fronius ACCTIVA Series with Active Inverter technology, the only all-round charger which Autologic recommends.
Detailed Explanation of features
When completed, a complete demonstration of all features are given so you are 100% familiar with your new options.
But [insert name here] does it for cheaper?
A lot of things can potentially go wrong with coding, we have taken all precautions to ensure that doesn't happen.
Why do you not perform remote coding?
A number of precautionary steps are taken in order to ensure your BMW is safe during the coding process, which cannot be verified remotely. Your pride and joy and its well-being is important to us!
Coding/Individualization (options may vary by model/build configuration) - $95, unlimited options
- Remove Seatbelt Chime
- Disable iDrive Disclaimer
- Close Windows with FOB
- Fold Mirrors with FOB
- Close Windows with Comfort Access (CA)
- Fold Mirrors with Comfort Access (CA)
- Digital Speedometer
- Windshield Wiper Return
- Fog Lights + HighBeams
- Fuel Reserve Warning (1/8 tank)
- Remove MPG Correction Factor
- Display Cruise Control Set Speed
- 1-Touch Window Up while Doors Open
- Remove Speed Correction Factor
- Display Headlight Sensitivity on BC
- Disable DSC Completely in iDrive Menu
- Remove BulbCheck for LEDs - Amber Corner Delete
- Increase Angel Eye Brightness (MY10+)
- Fuel Stop Suggestion in Route Guidance
- Remote Convertible Roof Closing
- BFD with Brake Lights - DRL Taillight Delete
- Add WeatherBand Radio
- Triple-Blink Blinkers
- Remote Convertible Closing
- Enable BFD under Normal Braking
- Delete AutoDimming Mirrors
- Double-Blink Hazards in Crash
- EU Double-Blink Hazards
- Raise Alarm Chirp Level - DVDinMotion
- Auto Unlock with Key Removal
- Level 2 M-Dynamic Mode (Euro)
- Remove Daytime Running Lamps
- Efficient Dynamics (6MT)
Other options available (at additional cost):
- TPMS Removal (for those running multiple sets of wheels/track setups)
- M-Adaptive/EDC Suspension Removal (those equipped with coilover suspensions)
- Race Seats (Recaro/Sabelt/Sparco retrofits)
- 2016 Map Updates
List will be added to as more items are tested. Available options vary among specific BMWs year, model and Vehicle Order (VO). Please feel free to contact me directly via phone, email or PM if you should have any questions and we will be happy to assist.
Macht Schnell Stage II Intake Charge Kit - Free install
Designed under the idea of function over form, Macht Schnell is the first to develop a proven intake system that compliments the already efficient M3 air box. By replacing the restrictive stock filter with a larger, more free-flowing performance filter the engine is able to breathe air easier.
Also replaced is the stock, accordion style intake elbow that connects the air box to the intake manifold. The Macht Schnell replacement Intake Charge Pipe (ICP) has very smooth and glossy interior walls and is 18% larger by volume, eliminating the turbulence and resistance that the stock elbow produces. The elbow is constructed from super strong polyethylene and has a textured exterior that perfectly matches the texture of the OEM intake manifold for a stock look. Included are Macht Schnell's own Intake Charge Scoops, making a matched combo that provides maximum air delivery for your S65 engine with noticeable power gains.
Heavy duty rubber intake couplers and European worm style clamps are included to maintain a tight seal while allowing engine movement. A 6061-T6 anodized aluminum inlet is embedded into the Macht Schnell Intake Charge Pipe to retain the stock PCV system.
The Stage 2 Intake Charge Kit Includes:
- Macht Schnell cotton gauze high performance air filter
- Macht Schnell intake charge scoops
- Macht Schnell intake charge pipe & filter adapter
- Heavy duty rubber intake couplers
- European style worm clamps
Macht Schnell Stage 2 Intake Charge Kit Features:
- Aids in additional airflow to factory airbox, providing additional gains of 8-12hp
- Deeper and more aggressive intake sound
- Washable/reusable cotton gauze high performance air filter allows for more airflow
- Polyethylene construction, nearly indestructible
- Elegant textured exterior, smooth polished gloss interior for maximum air delivery with no restriction
- Will not rust, or deteriorate over time
- Sturdy sidewall construction ensures filter will last the life of the vehicle
- Tight leak proof seal with your factory air box
- Deepest multi-layered pleats increase air flow and maintain critical protection levels, while still providing maximum air delivery
- Maintains OEM filter’s 99% debris collection efficiency to meet ISO 5011 standards
- Maintains BMW engineered pressurized air box and OEM appearance
Models Supported:
2008-2013 BMW E9X M3
Pedal Haus - Extended Billet DCT Shifter Paddles - $200 Installed
For a limited time enjoy Pedal Haus E9x M3 Extended Billet DCT Shift Paddles at $200 installed and $215 installed one the color filled paddles.
These extended DCT shifter paddles will instantly add new style and functionality to your BMW. Made from billet aluminum and fastened using the OEM hardware, these shifter paddles are very strong, durable and secure. The recessed finger groove and curved construction make these paddles both ergonomic and functional.
Available in a black or clear anodized finish, with or without machined holes and red or standard inserts.
Features
- Extended/longer paddles for easier shift operation
- Contoured to follow curvature of steering wheel - easier reach
- Ergonomics: easier to reach with fingertips, shorter "throw"
- T6 Aluminum Construction
- Rear pocketing for easier finger positioning
- Aggressive appearance
B&G lowering spring install special $495 OTD
With over 50 years of spring design and manufacturing expertise, B&G's S2 Sport Lowering Springs are engineered to improve handling while maintaining safety and ride quality.
B&G lowering springs are wound from high tensile Chromium-Silicone wire purchased from Europe’s premium mines. The lowering springs are cold wound on CNC coilers; heat treated and shot peened for longevity; and finished with phosphate treatment and a baked on resin powder coating for a hard corrosion resistant shell.
By redesigning the O.E. Spring and the lowering the center of gravity from 0.5-2.5 inches (depending on vehicle and application) our Technicians dramatically improve your vehicles performance and appearance. Incorporating a progressive rate design Allow B&G lowering Springs to offer higher rates for improved road hold, while maintaining a comfortable ride.
Features
- Aggressive ride stance with moderate drop
- Superb ride quality
- Progressive Spring rate design to maintain ride quality while improving handling
- Cold wound from high tensile chromium silicone wire
- ISO9001, QS1400, and TUV Certified
- Limited Lifetime Warranty
Lowering
-Front 1 inch
-Rear 0.5 inch